Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
26th January 2021, 10:27 PM #1
CNC Routing Service required - Brisbane
G'day everyone,
Apologies in advance if this is the wrong sub-forum for this thread.
I am currently building my work bench and I am looking for someone with the necessary equipment and knowhow to inlay my logo (i.e. my avatar) and my name into the end cap. The end cap is made of Purpleheart and measures approx 880mm long x 104mm wide x 82mm thick and the contrasting bit of timber will either be Tassie Oak or Blackbutt. I understand such a small job is simply not an attractive proposition when calculated on an hourly rate which is why I am willing to pay someone up to $200 to get the job done. I'm located on the south side of Brisbane but I'm happy to drive to wherever you are within reason. Please let me know if you're interested in taking this job on or if you know of anyone.
Cheers,
Mike
-
26th January 2021 10:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th February 2021, 05:26 PM #2
Hello KahoyKutter
If you want to PM me I would be happy to talk with you about it.
Bob WillsonBob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
Similar Threads
-
QUEENSLAND Dressing Service Required: Thicknessing 700mm wide board near Brisbane
By woodlogic in forum MISCELLANEOUSReplies: 1Last Post: 4th April 2018, 02:36 PM -
Slabmaster or Slab levelling service required Melbourne
By rbmorley in forum WOODWORK - GENERALReplies: 6Last Post: 24th June 2017, 07:52 PM -
wide belt sanding service required in Melbourne.
By steve_26 in forum WOODWORK - GENERALReplies: 0Last Post: 14th October 2015, 06:32 PM -
Timber Machining Service Required - Melb.
By wynyard in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 2Last Post: 17th October 2013, 12:05 PM -
Hi Guys. CNC Routing Service ?
By Phil Elliott in forum CNC MachinesReplies: 6Last Post: 26th November 2009, 05:29 PM