Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
10th January 2013, 09:55 PM #1New Member
- Join Date
- Jan 2013
- Location
- Australia
- Posts
- 3
does anyone use corel draw with there cnc
as well as our big router(see woodwop post) i have a multicam flat bed router i would like to use,does anybody use there cnc router with corel draw as there design program? if so how would you go about placing drilling points on a panel?
your help would be nice,i have used corel for drawing but have never used it for the multicam machine (i have never used the router)
-
10th January 2013 09:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th January 2013, 02:11 AM #2
all you should need is a circle the size you want , then in CAM specify how deep you want it drilled , in a 2d CAM program
how come a 10mm peg dont fit in a 10mm hole
Similar Threads
-
MT4 draw bar
By jack620 in forum METALWORK FORUMReplies: 15Last Post: 3rd November 2012, 09:51 PM -
Draw Bar Mallet
By Dave'H in forum METALWORK FORUMReplies: 6Last Post: 1st February 2012, 08:53 PM -
Draw bar pic
By Stustoys in forum METALWORK FORUMReplies: 3Last Post: 5th November 2010, 09:09 PM -
designing a draw for undermount draw slides
By SilverSniper in forum WOODWORK - GENERALReplies: 11Last Post: 20th October 2008, 08:17 AM -
Painter9 (corel software)
By jow104 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 4Last Post: 12th July 2005, 08:07 PM