Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
22nd July 2014, 08:15 PM #1Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
new old design PC motherboard suitable for mach3?
Long story short is like this..
My old shed computer was failing, random crashes.. I replaced the RAM, graphics card, no changes, then it died..
I purchased a new socket 775 motherboard on ebay as that was the likely culprit...
I get it today and install the CPU and no POST, no beep....
Upon doing some research the motherboard I bought does not support my CPU (intel E8400).. The motherboard only supports up the processors the generation before mine (about a 6600 is about the fastest it will support) even though the socket is the same..
Now the motherboard has a parallel port as standard.... I do not yet have anything to do with CNC but I remember reading with MACH3 you use a parallel port..
So would this motherboard be any use as a MACH3 controller? It has integrated graphics as well, and the DDR2 RAM I have is only a few months old and is the small form factor..Light red, the colour of choice for the discerning man.
-
22nd July 2014 08:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd July 2014, 10:50 PM #2
Yes. I have Mach 3 running under Windows Vista on an old (Core 2 Duo, about E6400 from memory) machine, so you don't need to stick to XP, either.
Similar Threads
-
Mach3
By SAISAY in forum CNC MachinesReplies: 1Last Post: 15th January 2014, 07:28 PM -
Mach3
By Wanderinau in forum CNC MachinesReplies: 2Last Post: 23rd July 2013, 11:46 PM -
Huanyang Mach3
By rolyjm in forum CNC MachinesReplies: 23Last Post: 16th September 2012, 05:06 PM -
VFD And Mach3
By ahmed in forum CNC MachinesReplies: 6Last Post: 10th January 2011, 10:38 PM -
Mach3 setup
By chrisb691 in forum CNC MachinesReplies: 5Last Post: 21st October 2008, 01:39 PM