Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Finally Done
-
20th November 2013, 04:28 PM #1
Finally Done
Used to be a CNC Shark HD Pro, now we call it "The Beast"
TheBeast02.jpgTheBeast01.jpg
No more plastic
All solid aluminiumEvery day is better than yesterday
Cheers
SAISAY
-
20th November 2013 04:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd November 2013, 06:01 PM #2
Well done saisay
Now you may like to look at replacing that VERY NOISY ROUTER with a spindle and vfd.Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
23rd November 2013, 12:21 AM #3
Not noisy actually but working on the change after I have recovered from my operation yesterday, not allowed to lift anything heavier than 2 kilo for the next 6 weeks
I do prefer the ER collet over the router one thoughEvery day is better than yesterday
Cheers
SAISAY
-
23rd November 2013, 01:32 PM #4
Well maybe you could use one of these then?
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
24th November 2013, 11:35 AM #5
Thank you Bob
Just what I have been looking for, I have already bought all the colletsEvery day is better than yesterday
Cheers
SAISAY
-
24th November 2013, 03:56 PM #6
I bought it, hope it is a good one
Every day is better than yesterday
Cheers
SAISAY
-
24th November 2013, 04:40 PM #7
For the money they are excellent value.
It would have been a little better if you could have got one with a 12mm shaft as they are stronger and less likely to flex.
When you get it, it may be advisable to grind down the length of the shaft so that it only just projects from the jaws of the router, less a little bit so that the adaptor is not pressed fully into the chuck, but minus about 3mm. As with standard bits for the router, if they are inserted all the way into the chuck then the chuck cannot tighten properly and is likely to let go.Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
24th November 2013, 06:51 PM #8
AHHA
So you still use the normal chuck, it fit inside like a bit?Every day is better than yesterday
Cheers
SAISAY
-
25th November 2013, 12:56 PM #9
Yes. It may be that other adaptors are available to completely replace the chuck, I don't know.
If you have a threaded spindle chuck on the router then you may be able to get the ER20 spindle rethreaded to that same thread size.
Search through here and see what you can findBob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
25th November 2013, 02:18 PM #10
Thanks Bob
Please tell Dorothy that she is still taller than me, they won't fix my spine, my bones are too brittleEvery day is better than yesterday
Cheers
SAISAY
-
25th November 2013, 10:44 PM #11SENIOR MEMBER
- Join Date
- Jun 2010
- Location
- Canberra
- Posts
- 769
Gotta say, very nice setup. Having gone around attempting to vacuum up all the snow/dust/particles from each job, I'm very jealous of your extractor - wish I had the room to install one
-
6th December 2013, 07:49 PM #12
Got my "Dragonball" bits today.
1 is 13mm and 1 is 40mm.
Going to be interesting to see what they actually do.
41xEISy+84L._SX385_.jpg6828731_7eextra_7e1.jpg6828731.jpgEvery day is better than yesterday
Cheers
SAISAY
Similar Threads
-
Finally got to try the GMC
By dai sensei in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 6Last Post: 28th June 2009, 03:47 AM -
Finally.....
By Sigidi in forum SMALL TIMBER MILLINGReplies: 6Last Post: 25th June 2009, 11:17 AM -
Finally
By Gags_17 in forum TRITON / GMCReplies: 17Last Post: 6th June 2007, 11:36 PM -
Finally!
By Toolin Around in forum WOODTURNING - GENERALReplies: 28Last Post: 23rd June 2006, 12:44 AM -
Finally got new saw......
By bloggs1968 in forum BANDSAWSReplies: 16Last Post: 10th April 2006, 09:46 PM