Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
13th November 2013, 05:57 PM #1SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
What happened to those centrelink computer consoles?
A few years ago there was a bit of discussion about some computer consoles that were being sold off.
I now find I would very much like one.
Any one happen to have one they bought but never got around to using? Long shot I know.
Greolt
-
13th November 2013 05:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th November 2013, 09:56 PM #2SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
I did a search and found an old thread about these.
Here is a pic. Does it jog anyones memory? Any of these languishing in the back of some ones shed?
-
18th November 2013, 09:41 PM #3
I got one exactly like that But its attached to my machine I think a lot of the ones around that time were sold not sure if you will find too many spare ones kicking around now though, but you just never know. Cheers Tony.
-
21st November 2013, 12:42 PM #4Member
- Join Date
- Oct 2010
- Location
- Perth
- Posts
- 90
I could be wrong but I thought Ch4is bought some of these?
-
21st November 2013, 02:04 PM #5SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
The ones I had were commonwealth bank kiosks.
All gone now apart from some touchpanels and mounting hardware, planning to build one from scratch one of these years.
I can spare a touch panel or 2 w/vesa panel mounting bracket & bezel if you wanted to build a cnc console Greolt but the monitors are duds (possibly repairable, haven't had a chance to look at them) and the panels haven't been tested, the touch panels are a separate 3M unit and can be transplanted to another 17" monitor.
-
21st November 2013, 07:23 PM #6SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
Thanks but no.
I was hoping for was a complete kiosk as they were sold off.
My thoughts were to make it a mobile machine control unit.
It would have been a miracle if someone had a spare, but thought I would ask, just in case.
Similar Threads
-
Virtual pipe organ consoles - anyone with experience?
By Lapun in forum MUSICAL INSTRUMENTSReplies: 0Last Post: 15th July 2013, 11:07 PM -
Computer modelling "Carving on a computer"
By MeTaBo MaN in forum WOODCARVING AND SCULPTUREReplies: 4Last Post: 8th September 2005, 12:49 AM -
Centrelink
By Peter R in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 23Last Post: 16th April 2005, 06:35 PM -
It happened again!
By chook in forum HAND TOOLS - POWEREDReplies: 16Last Post: 22nd December 2004, 09:08 PM