Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
6th April 2014, 12:09 PM #1Intermediate Member
- Join Date
- Sep 2013
- Location
- melb
- Posts
- 35
Help needed with cnc settings please, as per attached image
Hey g'day folks,
How do we go about rectifying this..I appologise in advance if this topic is already covered in the forums, I don't know the termanlogy of what I'm chasing to even qualify a search.
I've made a poor mans illustration of the issue I'm having I don't know what to call it so I'll do my best to explain.
peaks-and-valleys.jpg
The arrows represent direction of travel and the rectangular box represents the toolbit.
The shape below the arrow represents the job to be cut looking at a slice.
Figure 1 tool moving left to right moves upwards instead of cutting to the shape on the left hand side it follows the shape comming down on the right. Same thing comming to the second bump from the left moving up instead of going to the shape and follows the shape comming down on the right.
Figure 2 the opposite second cut moving up whenever approaching a shape from the right but following the shape down on the left.
For all intents and purpose it sort off catches the shape on the second pass.
I've noticed in a lot of work that has good detail, it is at times missed because the Z axis is already moving up before the shape - so when you look at the job its got a wavey pattern.
Is it possible to set your cnc router to cut as per illustration 2 and 3.. so the bit travels according to the shape of the objects that are being cut.
I understand a ball nose is always going to leave a rounded corner due to the shape of the bit.
Is this inherant in the way a router cuts?
Is there a name for the process I'm trying to understand?
Thanks in advance,
Steve
-
6th April 2014 12:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th April 2014, 01:35 PM #2SENIOR MEMBER
- Join Date
- Jun 2010
- Location
- Canberra
- Posts
- 769
It's a little hard to give suggestions without knowing what CNC software you're running, but if it's Mach3, do a Google on Constant Velocity.
-
6th April 2014, 01:51 PM #3Intermediate Member
- Join Date
- Sep 2013
- Location
- melb
- Posts
- 35
Similar Threads
-
No strings attached
By bobman 58 in forum INTARSIAReplies: 4Last Post: 3rd July 2013, 07:37 PM -
"Golden duck" drawing or image needed
By Dengue in forum WOODWORK - GENERALReplies: 4Last Post: 6th January 2010, 07:37 AM -
Monitor settings help needed
By AlexS in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 2Last Post: 20th August 2006, 05:33 PM