Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
6th August 2013, 06:29 AM #1New Member
- Join Date
- Aug 2013
- Location
- italy
- Posts
- 2
Big Problem with Huanyang VFD + 1.5Kw Water cooled spindle
i buyed the Huanyang VFD + 1.5Kw Water cooled spindle ; if i leave Pid 001 and 002 to zero ( manual control ) the spindle funcion withou problem
but if i set Pid 001 and 002 to two ( remote control with Mac3 ) with usb cable RS485-USB when I just try to start the spindle there is a click & the estop starts flashing
can someone hel me to solve the problem ?
thanks
-
6th August 2013 06:29 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th August 2013, 10:35 AM #2
Focus,
Can you provide more details.
1. What are you using to control the RS485 from your PC.
2. What type of adapter are you using for your RS485
-
6th August 2013, 05:32 PM #3New Member
- Join Date
- Aug 2013
- Location
- italy
- Posts
- 2
thanks for your help
1 - I use Artsoft Mach3 Version R3.043.066
2 - i use an adapter RS485-USB buyed on ebay like the one attached
I have configured the driver for the adapter and install the plugin that i found here http://royaumedeole.fr/informatique/...-huanyang-vfd/ ;
infact when i open the Mach3 the software confirm with a pop-up that "Configuration ok - spindle speed 3000 rpm at 50 Hrz" .
When i press F5 to start the spindle there is a click from the VFD and the estop of Mach3 starts flashing.
.
Similar Threads
-
Help Please: Huanyang VFD + 1.5Kw Water cooled spindle
By MikeBl in forum CNC MachinesReplies: 5Last Post: 15th July 2013, 11:29 PM -
Water cooled spindle
By SAISAY in forum CNC MachinesReplies: 0Last Post: 19th December 2012, 01:06 PM -
earthing a water cooled spindle
By snowyskiesau in forum CNC MachinesReplies: 15Last Post: 28th September 2012, 08:56 AM -
Water cooled spindle hose connections
By ncpro in forum CNC MachinesReplies: 12Last Post: 12th July 2012, 10:20 AM -
Setting up a water cooled spindle
By Lappy in forum CNC MachinesReplies: 7Last Post: 31st July 2009, 12:00 AM