Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Huanyang VFD and 2.2kw spindle
-
27th January 2013, 11:45 AM #1Member
- Join Date
- Oct 2012
- Location
- warrnambool
- Posts
- 77
Huanyang VFD and 2.2kw spindle
Hi there again, just when you think you have every thing under control yet another little problem arises, I have programmed the vfd as per the info I got on this forum sight, but when I press the run button all I get on the screen is F0000 flashing, the first question is: do I need to have the spindle attached? and is there a special way of executing the command, I have tried to follow the manual....... it is still chinese to me even if it is translated into english, I have read all the threads I have found but I must be missing something .... somewhere. Thanks to all members that have so far answered all my questions that I have posted, they have been very helpfull and very appreciated.
-
27th January 2013 11:45 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th January 2013, 12:31 PM #2Saw dust maker!
- Join Date
- Sep 2006
- Location
- Wandong
- Age
- 60
- Posts
- 453
From memory, if the display shows 'r XXXX', that's your running frequency and if it shows 'F XXXX' it's your set frequency. Sounds to me like you might not have set the speed initially. If it's flashing, it means the drive is powered up, but not enabled.
When I first power mine up, it flashes 'F 125.0' (or whatever the pot is set to) because that's the set speed from the pot inputs. Once I hit the go button, it stops flashing and shows a steady 'FXXX.X'
I think if you hit the 'up' button, it will go into speed setting mode. It's been a long time since I've played with the key pad, so my recollections are a bit dim on it.
I wouldn't run the inverter without the motor connected...
Hope this helps
-
27th January 2013, 03:53 PM #3
Running the inverter without the motor connected is fine.
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
27th January 2013, 04:27 PM #4Saw dust maker!
- Join Date
- Sep 2006
- Location
- Wandong
- Age
- 60
- Posts
- 453
-
27th January 2013, 04:47 PM #5
Yeah, that can still happen with computer power supplies.
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
29th January 2013, 09:11 PM #6Member
- Join Date
- Oct 2012
- Location
- warrnambool
- Posts
- 77
-
29th January 2013, 09:13 PM #7Member
- Join Date
- Oct 2012
- Location
- warrnambool
- Posts
- 77
-
31st January 2013, 08:30 PM #8Member
- Join Date
- Oct 2012
- Location
- warrnambool
- Posts
- 77
A bloody miracle
After reading and re-reading the manual, I decided to go through all the pd settings, the first one I changed was pd001 from 1 to 0 and it WORKED, the spindle is now running like a charm, next step is to add a pot to control the speed rather than using the key pad.
Similar Threads
-
Huanyang VFD - does the fan ALWAYS run?
By bluesmoke in forum CNC MachinesReplies: 2Last Post: 10th November 2012, 11:42 AM -
Huanyang VFD and Spindle motor
By che.gustavo in forum CNC MachinesReplies: 1Last Post: 28th October 2012, 08:18 AM -
Huanyang VFD and 2.2kw spindle
By naijin in forum CNC MachinesReplies: 2Last Post: 23rd October 2012, 07:53 AM -
Spindle speed control, Huanyang VFD and DC-03
By Bob Willson in forum CNC MachinesReplies: 62Last Post: 20th September 2010, 10:59 PM -
Help with Huanyang VFd
By PsychoPig7 in forum CNC MachinesReplies: 9Last Post: 1st June 2009, 12:52 PM