Needs Pictures: 0
Results 1 to 15 of 17
-
25th March 2016, 01:57 PM #1Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
[iD2CNC-SS v.1.0] Aluminum CNC design and build
Hello, Now i start my new design for low cost CNC with cost about $1,500 (Include water cooled spindle) , it build from aluminum t-slot profile and aluminum 5083.
This design will have 6 different machine size.
iD2CNC-SS Machine v.1.0 Specification (65cm x 45cm x 15cm , XYZ) :: I will start to build this first
– Machine working area 650mm x 450mm.
– Machine size 1,050mm x 800mm x 750mm (width (X) x length (Y) x height (Z)).
– Linear rod rail size 16mm (RM1605/RM1610) for all axis.
– Ball screw 16mm (RM1605/1610) for all axis.
– Use standard ball screw support BK/BF12 , FK/FF12.
– Aluminum frame use aluminum alloy 5083 10mm & 12mm.
– Design using metric unit (mm).
Other 5 machine size , see detail here --> iD2CNC - SS & SP machine spec
Other cnc build log , see more here --> CNC build log
Other CNC Controlller box build , see more here --> CNC controller box build
-
25th March 2016 01:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th March 2016, 02:08 PM #2Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
Start with CNC Controller box
[img]href="https://id2cnc.files.wordpress.com/2016/03/p_20160312_1249231.jpg?w=900[/img]
-
10th April 2016, 10:25 PM #3Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
-
11th April 2016, 01:30 AM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Hi,
Are you selling these units or the plans? If the plans, how much are they please? Can/will the CNC control box accept a 4th axis? Are you able to draw the wiring diagram if it's able to do so please?
I'm a bit of a dummy, when it comes to electronics and wiring, so this looks good.
Thanks
KrynTo grow old is mandatory, growing up is optional.
-
11th April 2016, 01:26 PM #5Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
Hi, These unit only sale in my country (Thailand) because it heavy if it ship outside country the shipping cost will expensive. For the plan i will release my iD2CNC-SS v.1.0 plan soon (this plan include detail of machine, wiring,BOM, etc..)
For 3 or 4 axis the wiring was the same just add one more stepper motor driver. You'll see the picture below , the controller box have space for additional stepper motor driver (2 screw that don't mount the stepper motor driver).
(This controller have 4 driver but use for 3 axis machine because machine use dual y axis if need to use 4th axis it need to add one more driver)
Here the wiring diagram (this diagram include with my iD2CNC-SS v.1.0 plan too)
-
11th April 2016, 09:52 PM #6Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Any particular reason you're going water cooled? Air cooled is pretty much always a better option
-
11th April 2016, 11:31 PM #7Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
-
12th April 2016, 01:18 PM #8Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
-
12th April 2016, 02:50 PM #9Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
Full detail build log --> My Blog iD2CNC.COM
-
8th May 2016, 03:32 AM #10New Member
- Join Date
- Jun 2015
- Location
- Poulsbo
- Posts
- 1
I would look into getting the Gecko G-540 4 axis stepper driver for your setup.
And check out CNCzone.com-CNC Machines, CadCam ,Classifieds, Metalworking,Woodworking. it's very robust , and easy to tune, and does micro stepping.
-
19th May 2016, 01:40 PM #11Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
-
19th May 2016, 01:43 PM #12Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
-
19th May 2016, 01:46 PM #13Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
After finished assembly then it time to test cut.
All images , go to see it --> iD2CNC-SS build log
If you like this design --> iD2CNC-SS v.1.0 Plan
-
27th July 2016, 12:58 PM #14Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
test cyclone dust collector & dust shoe
-
28th July 2016, 04:52 AM #15Intermediate Member
- Join Date
- Jul 2013
- Location
- Asia
- Posts
- 33
Just upgrade my dust shoe , change the guard from plastic sheet to rubber foam , it will better than plastic sheet like i did before. This's just an idea for dust shoe
.
.
.
.
Similar Threads
-
Scratch Build :: DIY Aluminum CNC , by iD2
By iD2 in forum CNC MachinesReplies: 25Last Post: 3rd October 2015, 11:58 PM -
DIY Design and Build Kayak
By anewhouse in forum KAYAK & CANOE BUILDINGReplies: 9Last Post: 2nd January 2015, 07:23 PM -
Dorade Box Design & Build WIP
By Lord Nibbo in forum WOODWORK PICSReplies: 13Last Post: 28th February 2011, 10:35 AM -
New Build..New Design
By floody_85 in forum MUSICAL INSTRUMENTSReplies: 96Last Post: 20th June 2010, 11:48 PM -
80/20 Aluminum Design Verification
By ttjarrett in forum CNC MachinesReplies: 5Last Post: 9th April 2009, 05:29 PM