Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
9th September 2013, 01:06 PM #1Senior Member
- Join Date
- Sep 2012
- Location
- ont Canada
- Posts
- 399
working with net downloade *.dxf files used aspire to help clean up
I downloaded an aztec calendar from the net , a *.dxf file about 8000k,wheni loaded it into aspire 4.0 it took forever as it turned out to ne 146 x146 in
I then shrunk it down to 16in x 16 in and it took awhile again but finally did come through.This was a complex diagram .There were open vectors etc,i cleaned it up ran it through corel to reduce the nodes placed it back into aspire sized it and exported it as a*.dxf for the laser
and at this time i save it as an aspire file ,which took very long and twice i had to stop it .
It created between 100k or 150k file ,is there a limit does anyone know .Maybe i was getting close
i finally got results but it took awhile
lasering an aztec calendar on birch plywood - YouTube lasering an aztec calendar
i use aspire 4.0 for both my machines and i am always learning
-
9th September 2013 01:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
SAW FILES TEST REPORT - extensive testing of 23 saw files by 3 experienced filers
By FenceFurniture in forum HAND TOOLS - UNPOWEREDReplies: 0Last Post: 11th August 2013, 09:03 PM -
Aspire 4.0
By SAISAY in forum CNC MachinesReplies: 2Last Post: 4th March 2013, 04:57 AM -
Aspire V2
By Greolt in forum CNC MachinesReplies: 4Last Post: 14th March 2009, 03:22 PM -
Aspire
By Greolt in forum CNC MachinesReplies: 34Last Post: 15th January 2009, 01:17 PM -
How do you clean files and rasps?
By Bleedin Thumb in forum HAND TOOLS - UNPOWEREDReplies: 12Last Post: 25th September 2006, 04:54 PM