What Plywood to use??

**sefrayser** · 9th March 2020, 01:34 AM

Im new to the CNC world. I purchased a Shapeoko XXL and learning the machine as well as the bit to use. I am however having a time figuring out material to use. I have learned on the smaller projects(1x10) the cut turns out better with good boards. I want to try a 24"x24" sign. I know I want to use Plywood.......just don't know what to use? Any advice will be greatly appreciated.

**BoneInspector** · 9th March 2020, 03:11 PM

Are you cutting all the way through or just the surface?

your bit choice has an impact on finish, down cut spiral helps to keep the top surface un damaged when using ply.

I found it would chip and get out quite easily and have much better success with solid timber. Others may have suggestions on ply, if pressed I'd suggest a good marine grade

**aldav** · 9th March 2020, 03:20 PM

Hi sefrayser and welcome to the forum. I guess you're in Virginia USA? Most of the members on here are located in Australia so many of the replies you get are likely to be in the local terminology and based on what is available here. Just something to keep in mind if some of the replies don't make sense to you.

Cheers,
David

Thread: What Plywood to use??

Thread Tools

Search Thread

What Plywood to use??

Similar Threads

Flexible Plywood in small quantities? Bending single layer of flexible Plywood?

Baltic birch plywood vs birch plywood

Plywood vs Marine plywood

Plywood Sales split from Mr Plywood

Marine Plywood vs Baltic Birch Plywood

Posting Permissions

	ANZAC DAY The spirit lives on. They shall grow not old, as we that are left grow old Age shall not weary them, nor the years condemn. At the going down of the sun and in the morning, We will remember them. Lest we forget.
This day our nation unites to commemorate the sacrifice of fallen servicemen and women during times of war. And the Band Played Waltzing Matilda \| Mothers Daughters Wives \| I Was Only Nineteen \| Diggers Lament