Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
-
1st August 2012, 02:26 PM #1
I need to spend some money on aluminium sheet
Hello everyone
I have finished my testing and now think that I am ready to start cutting out the aluminium panels for my front yard.
The first two panels are 2140*600*6 and 2135*600*6 (5005 grade) respectively.
I got a price from Action aluminium here in Brisbane and I want to know what others think of the price they quoted me. I ask, because a short while ago I purchased an off cut from them and they charged me $6 a kilogram.
But now, when I want to purchase what will become three full sheets of 2400*1200*6 they have quoted me $430.10 inc per sheet. At a weight of 46 kilograms per sheet, that works out to $9.35 per kilogram.
Admittedly, there are three cuts they will have to make to get the pieces out of the sheet, but a premium of $3.35 per kilogram seems like a high price for them to rum the sheet through their saw. 10 minutes work at most.
Can anyone advise me of a cheaper place to buy this material or do you think that the price justified?Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
1st August 2012 02:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
10th August 2012, 02:39 PM #2Novice
- Join Date
- Jan 2012
- Location
- Australia
- Posts
- 20
I just gave them a call to find out how much 10x160mm flatbar was, I had previously been quoted $360, $365 and $380 by my 3 local suppliers here in inverell so I put my ideas on the back burner, after seeing this thread I rang action aluminium and got quoted $120, I asked him to repeat while checking my hearing aids so I am pulling my plans back out, if you find a cheaper supplier then please post here but for the moment I think I will place an order with action aluminium
-
10th August 2012, 02:41 PM #3Novice
- Join Date
- Jan 2012
- Location
- Australia
- Posts
- 20
Forgot to add that was for a 4 meter length
Chris
-
10th August 2012, 03:51 PM #4
Thanks Chris
That is a very good price. It works out to $6.90 a Kg. MUCH cheaper than I got.Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
10th August 2012, 06:18 PM #5SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
Yea thats a good price for the bar, even cheaper than what I was quoted from the NSW store which was $37 + GST per/m
You'll probably find its + GST as they have always quoted ex GST when I ring up.
-
10th August 2012, 06:35 PM #6
all these cheep prices
wonder the the freight will be to Darwin
i think they saw me coming , or dont like the "boss" of the shirt i was wearing i got quoted $450 for a 3mm sheethow come a 10mm peg dont fit in a 10mm hole
-
10th August 2012, 06:58 PM #7
-
10th August 2012, 07:25 PM #8Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
11th August 2012, 07:53 AM #9Novice
- Join Date
- Jan 2012
- Location
- Australia
- Posts
- 20
That is right, I asked for a per meter price and he quote me $30+, so my original post is correct, like I said I had to check my ears
-
11th August 2012, 07:56 AM #10Novice
- Join Date
- Jan 2012
- Location
- Australia
- Posts
- 20
And I rang the NSW. Store so I don't know why we got 2 different prices?
-
11th August 2012, 09:51 AM #11
What's needed is for someone to start a trade account and have everyone order from this account. The more that goes through it would help
1. Drive the buying price down
2. Give people a consistent price per kg
I have just spent a bit on aluminium on my machine. I bought a sheet of 300 x 1200 x 12 for $138 ( with GST). This is also from action aluminium. This is 5083 H112 plate. I calculated the weight to be 11.33kg, which is $12Kg, so quite expensive??Not sure??
-
11th August 2012, 10:57 AM #12
Hi Mike
Not necessarily that expensive. That plate is a high strength alloy and is quite a bit more per Kg than 5005. You seem to have paid about 25% more for this aluminium than we would pay for standard. If you needed the extra strength then it is probably a reasonable premium.
Your suggestion for centralised buying is quite a good one. It may be worth following up. Between us we would probably purchase quite a lot of aluminium. They also sell Alcubond which some of us also use a bit of.
Edit: I forgot to say that I have opened an account with them. Cash only, but still an account.Last edited by Bob Willson; 11th August 2012 at 10:59 AM. Reason: Forgot something
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
11th August 2012, 09:38 PM #13
i have to post this some were
ive been using a mist sprayer for cooling while cutting aluminium and it works perfectly ,
not that much water , none runs off the material onto the machine , a bit of spray from the mill end flicking water away, old towels around the job stop that from making a mess ,
i didnt want to use my last peace of PVC 10mm sheet as a sacrificial layer , so came up with the idea of oiling the partial board , so the water wont get in , seems to work fine , yer yer it will swell from the oil , but 2 even coats with a paint bush ? the swelling should be even if anything above bugger all ,
i wanted to use 16mm partical board because i get packing sheets for free from work , i cut up 10 sheets into 600x400 ( 120 of them ) last time they were going to dump a pallet of packing sheets
i milled a sacrificial sheet as a hold down jig , to line up some hollow aluminium louver blade offcuts , same spot every time , and then some pockets , so the cut out peaces can be filliped over and lined up for there "underside milling " so needed the jig to last 24 cuts , the pockets tend to fill up with water , and i didnt want the " level's " to change
https://www.woodworkforums.com/f117/o...led-pc-156733/
my 2 cents worthhow come a 10mm peg dont fit in a 10mm hole
Similar Threads
-
Cutting aluminium sheet
By Bob Willson in forum CNC MachinesReplies: 79Last Post: 25th September 2012, 07:55 PM -
CNC router for aluminium and steel sheet?
By elliot42 in forum CNC MachinesReplies: 2Last Post: 23rd January 2011, 11:23 AM -
Will we be taxed on money we don't spend?
By artme in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 14Last Post: 30th April 2010, 07:00 AM -
Itching to spend some money
By jow104 in forum HAND TOOLS - POWEREDReplies: 3Last Post: 31st May 2004, 05:57 PM