Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: spindle speed.need help
-
15th July 2012, 05:15 PM #1New Member
- Join Date
- Jul 2012
- Location
- Tbilisi,Georgia
- Posts
- 1
spindle speed.need help
Hallo all
I have kinda problem with my new cnc 6040:
It came with controller box (not VFD, but controller box ) and the controller looks like this:
I am not familiar with PD000 stuff yet but I think it is set and locked by manufacturer as my spindle works.
Here's trouble:
the spindle must have 24000rpm as the manual says so,
but the controller screen shows maximum speed 9990-9995rpm
Could you help please??
-
15th July 2012 05:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th July 2012, 10:10 AM #2
Hi dito
We may be able to help if you tell us a little more about your machine.
The display that is on the front of your control box is actually the display from a VFD, so if you open up the box and see where the ribbon cable on the rear of the display goes to, that will be your VFD. Look for any helpful numbers or names. It may also be in the instruction manual.
The very first PD (PD000) controls the ability of the operator to modify the other PDs; so if it is set at 0 then change it to a one and that will enable you to modify all other PDsBob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
Similar Threads
-
Hf Spindle speed
By Kym A in forum CNC MachinesReplies: 9Last Post: 23rd April 2012, 10:44 AM -
High Speed Spindle
By wbleeker in forum CNC MachinesReplies: 6Last Post: 11th January 2011, 05:01 PM -
Spindle speed control, Huanyang VFD and DC-03
By Bob Willson in forum CNC MachinesReplies: 62Last Post: 20th September 2010, 10:59 PM -
Felder spindle moulders - variable speed
By jefferson in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 6Last Post: 1st August 2007, 08:58 PM -
Which bandsaw is better, single speed or 2 speed?
By felixe in forum BANDSAWSReplies: 5Last Post: 20th November 2006, 09:10 AM