Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Stepper Motor Id
-
30th May 2011, 06:28 PM #1Senior Member
- Join Date
- Mar 2009
- Location
- Robertson NSW
- Posts
- 139
Stepper Motor Id
Last week I bought a Quick CNC K6100A router on Ebay, minus the DSP controller, which is fine because I want it to convert it run on Mach 3. It is a very heavy machine with a steel gantry and some pretty big stepper motors which I am trying to identify, they are Nema 34 125-127mm long the number on them is FL86TH118A-22 1.8 degrees per step and 4.2 amps, the machines existing power supply to the drivers is 75 volts and the drivers are 2m860 from jmc-motion.com
Any help or advice much appreciated
Will
-
30th May 2011 06:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th May 2011, 10:46 PM #2Member
- Join Date
- Oct 2010
- Location
- Perth
- Posts
- 90
Did it not come with the DSP Controller or did you choose not to take it?
-
31st May 2011, 08:27 AM #3Senior Member
- Join Date
- Mar 2009
- Location
- Robertson NSW
- Posts
- 139
Marty
The machine was sold without the DSP Controller as the previous owner was keeping the controller for his new machine.And as I have a Tormach Mill already with Mach3 I think it would be a better idea to have both machines on the same system so as not to confuse myself.
WillLast edited by wbleeker; 31st May 2011 at 12:36 PM. Reason: to add more detail
-
3rd June 2011, 02:11 AM #4Member
- Join Date
- Oct 2010
- Location
- Perth
- Posts
- 90
Males sense. I have a K6100A as well and have thought of a mach3 upgrade in the future.
Similar Threads
-
Stepper cabling
By Lappy in forum CNC MachinesReplies: 6Last Post: 29th March 2011, 09:39 PM -
help with what i need to setup stepper motor.
By weisyboy in forum CNC MachinesReplies: 10Last Post: 6th December 2010, 12:54 AM -
Stepper motors
By benupton in forum CNC MachinesReplies: 8Last Post: 5th June 2010, 10:02 AM -
FREE: Stepper motor drivers
By snowyskiesau in forum CNC MachinesReplies: 1Last Post: 11th April 2010, 09:53 PM -
stepper motors
By eggo in forum CNC MachinesReplies: 2Last Post: 7th February 2010, 06:28 PM