Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Stepper wiring
-
1st October 2012, 08:15 PM #1
Stepper wiring
I have just wired up my stepper motors and thought i might share how I made it look neat
I used the jaycar 1540 microphone wire to the J-boxes and stripped the guts out of the off cuts to be used as a sleeve. I had originally used heat shrink but realised the outer casing was a better solution
Warrick
-
1st October 2012 08:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st October 2012, 09:45 PM #2New Member
- Join Date
- Aug 2012
- Location
- Michelago, NSW
- Posts
- 4
Nice neat job warrick, one thing to note is the size of the conductor. For my 125 oz motors it is recommended to use a 0.75mm conductor. The reason for using correct size cable is to reduce voltage drop between the power supply and motor under heavy load. Cable that is too small will reduce motor performance.
Similar Threads
-
driving a stepper
By oreos40 in forum CNC MachinesReplies: 6Last Post: 6th August 2012, 05:37 PM -
Very hot stepper motors
By Woodlake in forum CNC MachinesReplies: 4Last Post: 3rd January 2012, 02:30 AM -
Stepper Motor Id
By wbleeker in forum CNC MachinesReplies: 3Last Post: 3rd June 2011, 02:11 AM -
Stepper cabling
By Lappy in forum CNC MachinesReplies: 6Last Post: 29th March 2011, 09:39 PM -
Stepper motors
By benupton in forum CNC MachinesReplies: 8Last Post: 5th June 2010, 10:02 AM