trace a diagram from a book

**woodman12** · 2nd December 2019, 03:41 AM

this is a good example of a diagram from a book, edit the unwanted sections and print it
and trace out the image using logic trace 2018 and then show cutting it out on the co2 laser

YouTube

**Optimark** · 2nd December 2019, 08:42 AM

I started using a Co2 laser machine around 24 years ago, when cutting flammable materials we used an inert gas to prevent the material from burning and/or catching on fire. I noted you mentioned an air assist, is it normal air or an inert gas shroud around the cutting point?

I thought your tutorial was quite impressive, especially the way you choose or design a typeface. Nice film clip.

Mick.

**woodman12** · 23rd December 2019, 08:28 AM

thanks the air assist is just compressed air about 6-7 psi

Thread: trace a diagram from a book

Thread Tools

Search Thread

trace a diagram from a book

Similar Threads

intarsia diagram and traced it using logic trace 2018

digitize a full sized diagram using logic trace software and 3 jumbo drawing boards

Using The 3 Jumbo Board Setup to trace a large full sized diagram

logic trace 2018 digitizing a clock diagram and building the project

Exploded diagram/parts diagram for Metabo Magnum Tk 1685 Table Saw

Posting Permissions