Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: wood face plate for a lathe
-
27th April 2014, 12:23 PM #1Senior Member
- Join Date
- Sep 2012
- Location
- ont Canada
- Posts
- 401
wood face plate for a lathe
wooden face plates made 3 in and 4 in diameter , I used cherry
bored and threaded to fit the lathe
These should last a long time at least it will not damage your lathe tools
Any size can be made but its the wood blank required that can drive the cost up
as you need about 1.5 thick wood
http://youtu.be/p9eH2JXt8vI
-
27th April 2014 12:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Face plate fix
By Stustoys in forum METALWORK FORUMReplies: 35Last Post: 13th November 2010, 12:42 AM -
Fitting a 250mm chuck on a face plate, 12x36 lathe
By Dave J in forum METALWORK FORUMReplies: 8Last Post: 7th August 2010, 12:57 PM -
face plate problems
By weisyboy in forum WOODTURNING - GENERALReplies: 11Last Post: 23rd October 2007, 09:26 PM -
Face plate?
By A.WILLIAMS in forum WOODTURNING - GENERALReplies: 4Last Post: 30th September 2006, 02:06 AM -
using a face plate as a sander
By ss_11000 in forum WOODTURNING - GENERALReplies: 7Last Post: 31st January 2006, 11:08 PM