Page 6 of 13 FirstFirst 1234567891011 ... LastLast
Results 76 to 90 of 189
  1. #76
    Join Date
    Jan 2005
    Location
    Campbelltown NSW
    Age
    77
    Posts
    335

    Default

    I noticed whilst looking at the rear of the drill that there was some marks on the cable at the cable clip. This is directly below the height adjustment and as the machine is operated the cable can rub on the bracket and when at rest and may or may not be an issue. I'm probably overthinking this but with a lot of use the cable may wear through and electricity and metal don't mix that well. A possible solution is a 10mm spacer to help keep it clear or a clip to bring the cable to the side, not very elegant but I'll give it a try as a temporary fix.

    2B99BC2C-D15A-478B-87B4-987F7EA3FCFE.jpg
    22DDD64E-ADF4-4F08-9A84-F3EA8095E0F6.jpg E762FD98-328F-4681-80C3-CEE084B5E802.jpg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #77
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    The other problem is the cavities under the base plate- dropped a 1/16” drill bit down the centre hole when having a fiddle last night and it rolled to one side. Also the drilling swarf will gather under there.
    The base pate only sits on the 4 corners, there is a very slight gap around the perimeter so I guess you could blow the swarf out but that’s messy. I’ve designed a swarf drawer that sits under the base plate - hope to have it done later in the week.

  4. #78
    Join Date
    Jan 2005
    Location
    Campbelltown NSW
    Age
    77
    Posts
    335

    Default

    Quote Originally Posted by apple8 View Post
    A possible solution is a 10mm spacer to help keep it clear or a clip to bring the cable to the side, not very elegant but I'll give it a try as a temporary fix.
    I made up a spacer 16mm thick for a more permanent fix.

    3A49DF25-1B19-4889-8FFC-D21CFDD318EF.jpg 8358AE6C-538F-4C3C-8DC9-1353B024B455.jpgAFC6F741-8C10-4A88-A693-89FFAF2E5C3E.jpg

  5. #79
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    Just an update on the problem of swarf getting under the table when it’s bolted down.

    Modified my stand so there is now a cavity under the drill table. I was going to make a drawer but it’s not needed.

    C96A3F52-6D4F-40F4-9626-59A0F00882B7.jpeg

    I could drill out the back and fit an extractor hose but I don’t think it’s necessary - maybe something for the future.

    The table has now been raised to a more comfortable 97cm.

  6. #80
    Join Date
    Feb 2016
    Location
    Sydney
    Posts
    90

    Default

    Quote Originally Posted by KahoyKutter View Post
    $23 from Hare & Forbes. Inside bore is 25mm and I believe the handwheel shaft on the drill is 19mm so I've ordered a 25mm aluminium pipe with 3mm wall thickness to use as a sleeve. It should bring it down to 19mm but this is all theoretical at this stage because I don't yet have the drill or the pipe.
    Hey mate, do you have a part number or a direct link to hafco? Having trouble finding it

  7. #81
    Join Date
    Nov 2016
    Location
    Bris
    Posts
    840

    Default

    Quote Originally Posted by micmcg View Post
    Hey mate, do you have a part number or a direct link to hafco? Having trouble finding it

    Here's the link. I think the part number is either DY999 or #16104001C.

    And my plan to use an aluminium pipe as a sleeve to reduce the bore worked a treat with a bit of sanding. You will also have to tap a M8 hole for the retaining grub screw. The 3 spoke handle already has a 6mm hole that is the right size for the M8 grub screw but it's in the wrong location. it needs to be about 7.5mm from the base. Good luck.



    Here's a photo of it mounted to the drill....


    20190923_202539.jpg

  8. #82
    Join Date
    Feb 2016
    Location
    Sydney
    Posts
    90

    Default

    Quote Originally Posted by KahoyKutter View Post
    Here's the link. I think the part number is either DY999 or #16104001C.

    And my plan to use an aluminium pipe as a sleeve to reduce the bore worked a treat with a bit of sanding. You will also have to tap a M8 hole for the retaining grub screw. The 3 spoke handle already has a 6mm hole that is the right size for the M8 grub screw but it's in the wrong location. it needs to be about 7.5mm from the base. Good luck.



    Here's a photo of it mounted to the drill....


    20190923_202539.jpg
    Do you find it works better than the wheel?

  9. #83
    Join Date
    Nov 2016
    Location
    Bris
    Posts
    840

    Default

    Quote Originally Posted by micmcg View Post
    Do you find it works better than the wheel?

    Yes, it is infinitely better. The OEM wheel is just not ergonomic. With the 3 spoke, I can get the full travel with one smooth single-handed action.

  10. #84
    Join Date
    Feb 2016
    Location
    Sydney
    Posts
    90

    Default

    Quote Originally Posted by KahoyKutter View Post
    Yes, it is infinitely better. The OEM wheel is just not ergonomic. With the 3 spoke, I can get the full travel with one smooth single-handed action.
    Great. I put a steering wheel knob on mine and it improved things but it’s still not great. Will do your mod.

  11. #85
    Join Date
    Oct 2019
    Location
    Sydney
    Posts
    3

    Default

    Quote Originally Posted by KahoyKutter View Post
    And my plan to use an aluminium pipe as a sleeve to reduce the bore worked a treat with a bit of sanding. You will also have to tap a M8 hole for the retaining grub screw.
    Hey, do you have any material left over from the pipe?
    I'd be happy to pay you, plus cover postage if you'd be willing to cut off a bit.
    It would save me having to source and order the right pipe and would just end up wasting what I don't use.

    What did you end up having to sand to make it fit?

    I just ordered a PBD40 tonight and will also order that 3-spoke handle and do your mod. That wheel looks really awkward to use, and it sounds like your mod is way better!

  12. #86
    Join Date
    Nov 2016
    Location
    Bris
    Posts
    840

    Default

    Quote Originally Posted by azaram View Post
    Hey, do you have any material left over from the pipe?
    I'd be happy to pay you, plus cover postage if you'd be willing to cut off a bit.
    It would save me having to source and order the right pipe and would just end up wasting what I don't use.

    What did you end up having to sand to make it fit?

    I just ordered a PBD40 tonight and will also order that 3-spoke handle and do your mod. That wheel looks really awkward to use, and it sounds like your mod is way better!

    Mate, tbh I have no idea what I did with the leftover pipe but you're not really saving anything by getting it from me. Here's the eBay link of where I got it from. It's not very expensive and most of the cost is for postage which would be the same if I were to send it to you.

    As for what you have to sand, you're going to have to see what the fit is like between your aluminium pipe's inner and outer diameter, the inner bore of the handle, and the diameter of the shaft on your drill. Each have manufacturing tolerances and all 3 could be totally different to mine. In my case I had to sand both the inner and outer diameter of the aluminium pipe to make it fit. This is easier to sanding the inner diameter of the handwheel hub (cast iron) and the shaft on the drill (hardened steel) as aluminium is quite soft and the tube is more accessible. Just sand a bit at a time and test for fit regularly. Even if you stuff up, you'll have enough aluminium pipe to make several sleeves if you need to.

    Good luck.

  13. #87
    Join Date
    Oct 2019
    Location
    Sydney
    Posts
    3

    Default

    Quote Originally Posted by KahoyKutter View Post
    Mate, tbh I have no idea what I did with the leftover pipe but you're not really saving anything by getting it from me.
    No problem.
    I was thinking I might measure it up once it all arrives and then design up a few sleeves in Fusion 360 with varying tolerances and 3D print them.

    BTW, Machinery House said they sold the last handle to me and that the manufacturer can no longer supply them.
    I'd offer to make up sleeves for others, but it seems like there's no point.

  14. #88
    Join Date
    Oct 2019
    Location
    Sydney
    Posts
    3

    Default

    FYI it’s on sale again on Amazon right now for $299 as a Black Friday deal.


    Sent from my iPhone using Tapatalk

  15. #89
    Join Date
    May 2019
    Location
    Adelaide
    Age
    63
    Posts
    500

    Default

    I picked one of these up off Amazon, three day turn around, set it up yesterday and I have to say I’m impressed with it, quick set up, mounted on my existing drill bench, removed safety guard and fired it up after reading the manual (sure) .
    very quiet compared to my hitachi drill mounted in my Record Power drill stand, laser is accurate enough for my needs, lights good. Positive depth stop, easy height adjustment and the chuck is a breeze to use.
    very happy with it.

  16. #90
    Join Date
    May 2012
    Location
    Melb
    Posts
    1,542

    Default

    I got one of these last year when they were on special and a trial amazon prime membership gave free express shipping to replace an Ozito (I gave it to a mate as I really, really hated it), and have been using it heaps ever since, mainly with a 40mm forstner bit drilling 25mm deep holes in hardwoods.

    It's performed absolutely stellar since day 1, no detectable chuck wobble, not the most powerful drill by any means but more than powerful enough for the purpose.

    If you see them on special I'd highly recommend one! They're a really nice unit!

    Such a joy not having to changes belts too like on my old Ozito, I know it's trivial but man I really hated that! And also when the stupid chuck would fall out!

Page 6 of 13 FirstFirst 1234567891011 ... LastLast

Similar Threads

  1. Bosch 710W Corded Bench Drill
    By MandJ in forum GENERAL & SMALL MACHINERY
    Replies: 5
    Last Post: 7th July 2020, 11:05 AM
  2. Bosch Bench Cookies
    By Jim Carroll in forum WOODWORK - GENERAL
    Replies: 11
    Last Post: 27th July 2010, 04:21 PM
  3. Bosch portable bench saw
    By epf in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 20th June 2010, 03:44 PM
  4. Bosch PSB 500 RE Drill
    By Malcolm Eaton in forum HAND TOOLS - POWERED
    Replies: 3
    Last Post: 21st December 2009, 02:28 PM
  5. Bosch Cordless 36V Drill - and a pat on the back for Bosch
    By Clinton1 in forum HAND TOOLS - POWERED
    Replies: 0
    Last Post: 6th March 2007, 04:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •