Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
-
2nd June 2009, 01:51 PM #16
Yes that'll do it
Phil
In spite of being a very heavy cast top it is posible to warp them if as you say screws are left protruding the precice tolerances around the bronze bearings are such that the plate must be flat. The 8 levelling screws aren't usually an issue, just a bit fiddly.
The above table bit change feature somewhat negates the benefits of the UniLIFT, if you've got to switch the router off and manually wind the collet above the table. The answer is the Xtreme Xtension, no more under the table stuff except for changing the speed which can be done standing up.
I hope that this helps.
Regards
Grahame
-
2nd June 2009 01:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd June 2009, 02:47 PM #17Novice
- Join Date
- May 2009
- Location
- Sydney
- Posts
- 18
I have no issues with the height thing - it's easy to wind it up. I love the lift (and I love my LS17 & Wonder Fence as well, I might add! I was trying to say that the process of changing bits above the table works fine, even with needing to manually turn the lift knob on the TRA001. It's no big deal (for me, on my table, at least).
The lift is magical, the levellers are my one and only pet hate. Apart from using too many of the little worms (one per corner is all that is needed) is that the worms are so small, they need a solid surface to bear on. Timber doesn't work, they just slowly bite into it. They need metal to sit on.
But that's no big deal either, I just put four adjustable bolts under my table, going up and under the plate, and once I set it level, it stays that way.
The main point I was trying to make was a little note to anyone putting a TRA001 on a UniLift .. remove the two little bolt-head things Triton uses to mount the router on their router table.
Phil
Similar Threads
-
Wixey Remote Digital Read-out/ UniLift
By hitch in forum ROUTING FORUMReplies: 7Last Post: 8th May 2009, 09:20 AM -
Digital Read-out for UniLIFT
By Gwhat in forum PROFESSIONAL WOODWORKERS SUPPLIESReplies: 0Last Post: 28th January 2009, 10:23 AM -
Wixey Digital Saw Fence Readout Fitting Warning
By DJ’s Timber in forum TABLE SAWS & COMBINATIONSReplies: 2Last Post: 5th November 2008, 11:10 PM -
Wixey Saw Fence Digital Readout on TL10-S
By Big Shed in forum TABLE SAWS & COMBINATIONSReplies: 28Last Post: 13th June 2008, 08:50 PM -
Wixey Digital Fence Readout
By waikune in forum HAND TOOLS - POWEREDReplies: 7Last Post: 20th August 2007, 08:37 AM