Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 16 of 16
Thread: Hammer a3-31 planner thicknesser
-
2nd December 2010, 05:44 PM #16
Had the camera to hand, so I snapped the method I use to keep the dusty hose out of the way when in thicknessing mode on my JPT-310.
The black adapter at the end of the hose is a Carbatec push on rubber thingy, which holds the pipe in place better than just pushing it onto the dust hood.
Pipe is held out of the way by a loop of stretchy garden tie material (which stays on the hose) and can just be hooked over the jointer tables when required.
Cost of this precision hose alignment accessory is approx. $0.05.......
-
2nd December 2010 05:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Thicknesser/Planner anyone?
By 4Him24_7 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 1Last Post: 14th April 2009, 10:13 AM -
GMS Planner, thicknesser
By Robbie_butler in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 31st December 2006, 04:18 PM -
Planner/Thicknesser
By tyrone in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 5Last Post: 19th December 2003, 09:49 AM -
Sherwood Planner / Thicknesser
By blindbambi in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 12th March 2003, 06:54 PM -
planner/thicknesser
By Kev Y. in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 13th March 2002, 03:40 PM