Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: JessEm Rout-R-Lift (PART 1 of 2)
-
26th October 2009, 10:41 AM #16Awaiting Email Confirmation
- Join Date
- Oct 2009
- Location
- Portland, OR
- Posts
- 1
What router bit did you use?
I've got one of these, however I don't have any instructions. I was going to use some pieces of wood to make myself a template however i'm not sure of the external curve radius. I went to rockler and picked up a very short 1/2 inch template bit. But now that i have it at home it looks a bit thin. Just wondering what you used for mounting it.
-
26th October 2009 10:41 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th October 2009, 12:37 PM #17
I used a 19mm (3/4" in your language) straight cutter. It will cut the correct radius. Use the main plate to mark the main cut-out then mark an inner cut-out 3/4" from the main cutout. Cut the inner out with a jig-saw then rout the main cutout. I clamped a ProGrip bar around the cutout giving me a router guide.
I reckon you could download the instructions from the JessEm web site or ask them to send it to you.
Cheers
Attachment 120427 Attachment 120428If you never made a mistake, you never made anything!
Similar Threads
-
Help with Jessem Rout R Lift
By gjnairn in forum WOODWORK - GENERALReplies: 1Last Post: 12th October 2008, 09:57 AM -
Exacta router lift and Rout-R-lift
By zelk in forum ROUTING FORUMReplies: 8Last Post: 14th November 2007, 11:27 PM -
Jessem Mast-R-Slide
By fletty in forum HAND TOOLS - POWEREDReplies: 0Last Post: 17th November 2006, 11:05 AM -
How do I rout this ??
By old_picker in forum ROUTING FORUMReplies: 16Last Post: 22nd August 2006, 07:55 PM