Page 9 of 12 FirstFirst ... 456789101112 LastLast
Results 121 to 135 of 175
  1. #121
    Join Date
    Mar 2018
    Location
    Alstonville
    Age
    74
    Posts
    1

    Default

    This man gives the best warranty back up I think I have ever experienced. I had a bearing problem with a 305 Combo Saw and he replaced half the saw to make the process simple. No return transport worries. Anything else I need and want to buy in future will be from Swartz

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #122
    Join Date
    Mar 2018
    Location
    GOSFORD NSW
    Posts
    31

    Default

    Hi good people.
    I have a SCMS, stand & vacuum set. Never had a belt driven saw before. I know I can call Samuel but this would be best answered here to save too many phone calls. Can I get replacement belts from Swarts and , more importantly, can they be easily replaced.

  4. #123
    Join Date
    Mar 2018
    Location
    GOSFORD NSW
    Posts
    31

    Default

    Got the kit and took it out for a spin.
    First impression. 70MM X 35MM radiata pine behaved like Teak.
    The cross cuts are clean but I think the supplied blade is ( sorry to use
    the word ) crap. Knife through butter is the very last way I would describe
    the cutting process.
    Makes me wish I hadn't sold my 305mm Bosch years ago.
    The multi purpose stand is sturdy but not built with this saw in mind.
    Either that or the designer didn't have a clue.
    The available usable width on the end roller is about 65mm and the rest of the roller
    is there for show. The T piece holding the roller should be replaced with a right angle in
    any future design revision.
    It will suit my immediate purpose but I can't wait until I have the money for a real saw.

  5. #124
    Join Date
    Aug 2016
    Location
    Brisbane
    Age
    57
    Posts
    1,311

    Default

    You must have something wrong with your blade or your setup.
    Mine cuts Karri like butter and Karri is harder than Jarrah. Every through cut is a breeze and I can take off less than a mm to creep up to the cut because it is so clean and accurate and easy.
    I have cut plenty of 70MM X 35MM radiata pine and a lot more than that. Cuts like it's nothing. Always has. I've had it for 15 months. Still sharp and easy.
    If yours is not doing that then I suggest you don't use it any more until you work out what is wrong. It could be a safety issue.

    What exactly do you mean that the blade is "crap"?

    I did take care to adjust it to be square and I don't rely on the angle of the positive stops. However in terms of cutting, even out of the box the blade and power has always been marvellous.
    What you are describing sounds like it is not even the same saw. In other words something is very wrong.

    I don't have and don't need the stand so I can't comment about that.
    I have a Swarts vac, which is good but it's the previous model not the new one so I can't comment on that either. Not that you mentioned the vac.

    A Bosch slide 305mm is still 3 times the price of this saw. Not that there's anything particularly wrong with this Swarts saw.
    I like the ease of doing compound bevels on the Bosch and I assume the positive stops are accurate. It's a nice saw I'm sure.

    I think you need to give Samuel a call and work through these issues.

  6. #125
    Join Date
    Oct 2013
    Location
    Perth, Australia
    Posts
    1,813

    Default

    Yeah the comment on poor cut quality says something is off for me, I was very surprised with the quality of my blade. Have cut Jarrah, Sheoak and miles of Pine without a hint of trouble. Have you checked the blade is true and the tips on the teeth are all present?

  7. #126
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default

    My blade is great too! Have not cut a heap with it but what I have cut has been both hard timber and soft, thick slabs of 100mm and down to 2mm for the thin stuff. All good.

  8. #127
    Join Date
    Mar 2018
    Location
    GOSFORD NSW
    Posts
    31

    Default

    Oh great. It sounds like I have a bad blade.
    Yes something is very wrong when my neighbour's Ryobi 210mm
    acts like a knife through butter compared to this new saw.
    The saw blade was square both ways out of the box.
    After performing around 1700 of the same cuts ( 300mm lengths
    of 70mmX35mm radiata pine ) this year using other saws I know absolutely
    that something is amiss.
    Yes best contact Sam now that I know my blade is not the norm.
    Just out of curiousity the model number of the blade is SW2092.
    Is this the same as the blades on your saws ?
    Maybe Sam changed suppliers.

  9. #128
    Join Date
    Mar 2018
    Location
    GOSFORD NSW
    Posts
    31

    Default added comment

    A possible big apology to Sam coming up.
    All else being equal, will an 80 tooth blade cut 'faster' than a 100 tooth blade ?
    I may have been comparing oranges to apples.

    My muscle memory has most likely been based on years of fast cutting
    with a Bosch 305mm which in all likelihood had 80T
    My neighbour's Ryobi ( he's out right now ) is most likely a 40T.
    Last edited by TERMALERT; 21st March 2018 at 09:55 AM. Reason: to add something

  10. #129
    Join Date
    Aug 2010
    Location
    Horsham Victoria
    Posts
    5,713

    Default

    Yes tooth count will make a big difference.

    Good to hear you got it sussed

    DaveTTC
    The Turning Cowboy
    Turning Wood Into Art

  11. #130
    Join Date
    Nov 2012
    Location
    SE Melb
    Age
    64
    Posts
    1,277

    Default

    Quote Originally Posted by TERMALERT View Post
    will an 80 tooth blade cut 'faster' than a 100 tooth blade ?
    Definitely, but 100 tooth blade gives a better finish.

  12. #131
    Join Date
    Mar 2018
    Location
    GOSFORD NSW
    Posts
    31

    Default

    The reason for slow cutting was staring me in the face all along.
    Official and unreserved apology to Sam at Swart Tools.
    I was comparing apples to oranges and blaming you for it.

  13. #132
    Join Date
    Mar 2018
    Location
    GOSFORD NSW
    Posts
    31

    Default

    Part of the instruction set 'seems' to indicate that the saw blade is reversed.
    4. The arrow on the saw disc showing the rotation direction should coincide with the arrow on the saw ( tick ).
    The saw blade teeth should direct downwards towards the front of machine ( ???? ).
    My teeth are pointing towards the 'back', which seems correct.
    I guess it a matter of English to Chinese translation.
    DSCN2526.jpg
    Last edited by TERMALERT; 22nd March 2018 at 09:45 AM. Reason: To correct a 'too sleepy to think clearly' statement.

  14. #133
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default

    The blade is facing the correct way (direction of rotation) otherwise it would not cut the timber.

  15. #134
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    84
    Posts
    2,713

    Default

    Any more updates guys as I am looking at buying a SCMS?
    Tom

    "It's good enough" is low aim

  16. #135
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default

    No problem with mine, it has been great.

Page 9 of 12 FirstFirst ... 456789101112 LastLast

Similar Threads

  1. review 305mm slide compound mitre saw
    By mickyhomer in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 6
    Last Post: 12th January 2010, 01:46 PM
  2. 305mm Sliding compound mitre saw options?
    By brettme in forum HAND TOOLS - POWERED
    Replies: 4
    Last Post: 18th July 2006, 10:36 PM
  3. GMC Compound Mitre Saw 305mm
    By Backyarder in forum HAND TOOLS - POWERED
    Replies: 4
    Last Post: 18th June 2004, 03:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •