Thx for the update skot
DaveTTC
Turning Wood into Art
Printable View
Thx for the update skot
DaveTTC
Turning Wood into Art
A couple of short vids showing the laser line changing position & the cutting.
Sorry about the video quality........if I was a quality cameraman, I'd be working in the movie profession.
https://www.facebook.com/scott.brack...86259665973075
Can people see those videos?
I uploaded to facebook by mistake and not to YouTube
Not sure if my settings for my facebook are set for public viewing of these vids....I will upload to YouTube and post another link
OK.... YouTube links to the above mentioned videos
Cut...... https://youtu.be/a3v1VHIzZ-o
Laser... https://www.youtube.com/watch?v=Mfq-c0yzKCE
Let's try this way
That's better. Watch it as soon as I get home
DaveTTC
Turning Wood into Art
How did you get the laser to be beside the cut line?
Mine is right on the cut line which means that the blade takes 1mm off past the laser line.
It was delivered that way
Difference in size from my old broken Electra Beckum to the Swarts
Attachment 406044 Attachment 406045
but I only had to drop my recessed section of the bench for the SCMC by 5mm for the table of the SCMS to be the same height of the adjoining benches
This is a direct statement from Swarts Tools website for the SCMS........
"New to the Australian market our saw boasts internal bar ultra-smooth ball bearingslides. These allow you to put the saw right up against a wall or at the very the edge of a bench without the slides extending out the back of the saw like other models."
This statement is correct in respect to the saw being able to placed up against the wall UNLESS you want to use the supplied dust bag. If the bag is used it protrudes approx 100mm past the rear of the machine when in the full back position. So the SCMS would have to be pulled away from the wall and take up more bench space if the dust bag is utilised. The saw would be able to be back against the wall if a shop vac or DC was attached with an elbow on the exhaust duct on the saw.
Cheers
Scott
Wow, a bit off subject, but you certainly haven't wasted too much time filling up that new shed. :D
I have had that "new" shed for over 11 years
Equipment sure is getting cheaper
I just had a look at posts from people that had bought the same model Electra Beckum as mine.
Discovered a post by a British woodworker who was extremely pleased that he got a discount on his and paid £269 back in 2002. I knew I paid a far bit but can not remember the amount. That was about $500 in 2002 dollars. You can pick up similar machines for $200-$300 now.
Whoops! Getting my forum members crossed up. I guess it's a byproduct of ageing. :B
My Swarts has gone off square. The blade is no longer square to the fence. I thought it was originally but now I am cutting wide boards for real work I see it is way out of square. Perhaps something is loose. I'll have to refer to the manual to figure out where to adjust that.
Yes you can cut quite wide boards on this beast. These boards are about 300mm.
Sent from my SM-G935F using Tapatalk
Dave,
If you look at one of my earlier posts you will see that squaring the fence to the blade is not in the manual but easy to adjust...just need a 6mm allen key