Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2010
    Location
    Coffs Harbour Area
    Posts
    4

    Default Antique? Wardrobe/Dresser Restoration

    Hi all,
    On the weekend I purchased an old wardrobe and am planing to restore it to its former glory. I'm unsure as to how old it is exactly but it is made of tasmanian oak (I think). The previous owner must have attempted to refinish it with a thick layer of shellac which is now peeling and looks quite horrible , I will be taking this off with metho soon.
    As I go through this , as my first resoration project, I will keep you all up to date and will most likely ask for some help, from all you gurus out there
    Is there any way to find out how old it is?
    Also, what equipment should I purchase if I also plan to restore more pieces in the future?

    Digit

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    4,986

    Default

    Hi Digit,
    It's Art Deco, so could be '30's plus/minus 10 years. Looks to me like hoop pine panels (maybe ply?), maybe stained hoop pine framing/shelves too. The door panel looks like Aust red cedar. I wouldn't try rubbing the finish off with shellac and metho, too slow and you will get steel wool stuck in places like between the panels and frame. Instead get a spray bottle of metho and glad wrap. Spray a panel and stick the glad wrap to it. Wait until the finish bubbles up, maybe 15 mins. If it dries out, lift a bit and spray more metho. When the finish is loose, scrape it off with a soft wooden block or a pallet knife.

  4. #3
    Join Date
    Sep 2010
    Location
    Coffs Harbour Area
    Posts
    4

    Default

    Thanks mic-d that advise is gonna save me heaps of time, with taking off the shellac
    Just wondering if it would be worth getting a Dremel for fine detail work and touch ups.

    Digit

  5. #4
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    4,986

    Default

    A dremel is handy, I don't want to discourage anyone from buying a tool But remember the idea of taking the finish off gently is to preserve the aged timber, if you go digging around with a dremel you might expose new timber and have problems with colour matching etc...Metho to soften the finish and reapplied in difficult areas with careful use of scrapers is just my opinion is safer.

  6. #5
    rogerjenkins Guest

    Default

    I use metho and some of those plain ordinary kitchen Nylon Scourers,- black & gold ones are best as are softer than other more expensive brands. Pour the metho into an empty icecream container, dip into the nylon scourer, and briskly rub each section of the old wardrobe, regularly dipping the scourer into the metho to keep the timber surface wet. For awkward carved sections, suggest using a decent nailbrush to get into the finer carved sections, again keeping the area being worked on as wet with metho as practical. Also pays to buy a Four Litre container of Metho, as it quickly evaporates, therefore a small litre bottle goes nowhere. For big jobs, your local Hardware store should be able to get you a 20 litre drum of metho. Yes, I know you are thinking, " What the 'ell do I need a 20 litre drum for,- it's ONLY one small job ?
    Yes, sure,- but jobs like these have a habit of, " G-R-O-W-I-N-G " Neighbour down the road / street hears about your project, and they want something done, then someone else comes a, "knocking," too;- I think you get the drift
    Happens all the time to me
    Roger

Similar Threads

  1. Restoration of an antique Work Bench.
    By rogerjenkins in forum RESTORATION
    Replies: 13
    Last Post: 21st April 2012, 10:13 AM
  2. Replies: 3
    Last Post: 21st February 2012, 04:27 AM
  3. Silky Oak Wardrobe Restoration Question
    By Earthling#44-9a in forum RESTORATION
    Replies: 8
    Last Post: 12th July 2010, 09:47 PM
  4. antique restoration
    By luc in forum FINISHING
    Replies: 1
    Last Post: 19th July 2004, 04:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •