Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 38
  1. #16
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by woodhutt View Post
    This Bundaberg hand sanitizer. Is it to be taken internally or externally"?
    Pete
    Im not good at reading instructions so I’ve decided to spread it on my hands and then lick it off?
    a rock is an obsolete tool ......... until you don’t have a hammer!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #17
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    It’s pimply sissing down here and I can’t hear myself think in my corrugated iron shed so its time to go up to the house for a coffee. I had planned on trying to keep the bulk of the timber from the table top frame and had a couple of strategies....

    B76126EC-B720-4B0F-AA10-75D76927BFFA.jpeg

    .... but having now got the table top off I have to settle for the fact that it ain’t gunna happen!
    I had to lever the table top away from the frame because that is often the only way to find the pins that hold it all together. Having found them, my usual method is to drill into the pin and use a screw and claw hammer to get it out.

    F4B5FADF-4C77-49E7-A745-D5244A03EAA9.jpeg 73AAB116-E240-4688-A65D-C2FEDBABD2F6.jpeg D836CE22-9239-4BE6-82EC-087F37A37A1B.jpeg

    Having extracted 4 pins ......

    6787F83B-E7E5-44DA-90AA-14A1A755F187.jpeg

    ...... I ‘tapped’ the top off ......

    E80D2230-8273-4405-9774-F5E73FE94D7C.jpeg


    ......only to find that some reprehensible human being had driven in a couple of nails which caused a bit of damage and certainly put paid to any idea of reusing the original top frame. I might be able to put new top and bottom faces on the frame but...

    4D424641-04C6-459E-8B84-4D82112D31CD.jpeg 862861A3-75B8-462E-AAEF-B9319B882135.jpeg
    a rock is an obsolete tool ......... until you don’t have a hammer!

  4. #18
    Join Date
    Feb 2019
    Location
    Upper Hutt, New Zealand
    Posts
    215

    Default

    Oh dear! Is the edge banding at least recoverable? It doesn't look too bad from the photos. Pete

  5. #19
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by woodhutt View Post
    Oh dear! Is the edge banding at least recoverable? It doesn't look too bad from the photos. Pete
    I fear the entire top frame is beyond resurrection. I’d say the table has been out in the weather for a long time and water has seeped into all of the fine joinery and quietly rotted it away. Putting panel beaters bog into the holes just sealed the water in.

    7A15F44E-ABB9-4B0D-8BCC-F51FFEC9D626.jpeg

    The frame immediately under the table top is in pretty good nick though. I’ll make a new top frame using traditional through tenons, place it onto the frame, mark the location of the 4 corner stub tenons and cut the matching mortises before installing the inlayed panel. The brutal process of removing the tabletop has already resulted in me being down on the floor on hands and knees searching for tiny pieces of displaced ‘bone’!
    a rock is an obsolete tool ......... until you don’t have a hammer!

  6. #20
    Join Date
    May 2011
    Location
    Albury
    Posts
    3,019

    Default

    Hi fletty, If this is indeed bone and you're going to have a go at carving the inlay yourself my wife has a recipe for preparing the bone that she used to use at the lapidary club. My only recollection of her working with the bone is that it was pretty stinky and was thus strictly for the club rooms.

  7. #21
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by aldav View Post
    Hi fletty, If this is indeed bone and you're going to have a go at carving the inlay yourself my wife has a recipe for preparing the bone that she used to use at the lapidary club. My only recollection of her working with the bone is that it was pretty stinky and was thus strictly for the club rooms.
    Thanks Aldav. Your comment about the odour revived my fading memory of what I was shown in China! Think knackery meets tannery meets hide glue! My mentor got his supplies from the back door of an eating place that I wouldn’t even walk in to. He pulverised the bone with a hammer and then ground it to a fine powder with a mortar and pestle in to which he then added hide glue if it was a new job yet to be finished, or shellac if it was a repair. After searching the floor, there is now only 1 ‘petal’ in the top left corner....

    2E477D38-A103-4B63-9877-726F04B9A1EE.jpg

    .... that I feel the need to repair? I’m tempted to decant a tin of Classic Cream spray paint into a cup and use a fine brush to wick it into the rebate .......... provided you guys promise not to tell anyone
    Attached Images Attached Images
    a rock is an obsolete tool ......... until you don’t have a hammer!

  8. #22
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    How’s the table going Fletty?
    I noticed a can of Restorafinish - used that on some other of my wife’s grandparents furniture (following your recommendation) and it can up a treat.

  9. #23
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Hi Lap’, yes, sorry but I got a bit sidetracked with this.....

    Filco slide boxes

    .... but you must be telepathetic because only this afternoon I started looking for the most appropriate timber to make the new top frame. I have some rather plain Australian red cedar that has the right base colour but I’m worried about its softness?
    I use the Restor-a-finish on just about every job I do now but discovering that they also made a NEUTRAL as well as dedicated timber colours has made it even more useful! It is perfect for Chinese black lacquer ware. I’ll be back on to the table in the next few days because it is to be a surprise birthday gift due on May5 ...... which used to seem so far away
    a rock is an obsolete tool ......... until you don’t have a hammer!

  10. #24
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Back on to the Chinese table restoration. I went down the backyard to the SECRET TIMBER STASH and found a glorious piece of dark Australian red cedar

    ABAF7BD3-C97B-4690-BB55-24CF1462C6BC.jpeg

    It is only just big enough to do the job and so I can’t afford to make any mistakes but, given the number of mistakes I have made recently, this will require a minor miracle!
    a rock is an obsolete tool ......... until you don’t have a hammer!

  11. #25
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    4,770

    Default

    We believe in you Fletty. Get it done
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  12. #26
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by NCArcher View Post
    We believe in you Fletty. Get it done
    You’re possibly referring to the fletty who wouldn’t have done a marathon sanding effort yesterday without the vacuum hose being connected to the sander? The fletty currently STILL cleaning up the shed did?
    a rock is an obsolete tool ......... until you don’t have a hammer!

  13. #27
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

  14. #28
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Had a light day in the shed today. It seems I was making quarantine look like too much fun? I trimmed the top frame joints until it all came together neatly around the inlayed panel...

    B0A22F15-A6FD-4207-A64B-694CA636C2AB.jpeg 6A248E22-349A-476F-888D-7E71228250C1.jpeg

    ... and then glued the frame with hide glue making sure that the inlayed panel could still float

    6FA07731-DDBB-486D-9334-0E1680975339.jpeg

    The four lugs that come up from the legs and are pierced by the pins that held table top on,

    5F7B1F50-3F40-480F-A7BA-3D5C7F789782.jpeg

    ..... were damaged during disassembly due to the hidden nails IN ADDITION to the pins and need to be repaired even if I only use them to locate the table top, so I extracted the pieces from the old table top frame and glued them back to the stumps that were left.....

    0FCFF9BE-A6D3-4A69-B610-B3E62325F33E.jpeg 45DCD4CF-0944-49BA-82E0-E7B129B89F13.jpeg

    The clamped table top closed up nicely around the inlayed panel and I’m looking forward to cleaning it up tomorrow...

    0EF2F816-6E30-427A-8FEB-6962FD0AF22D.jpeg
    a rock is an obsolete tool ......... until you don’t have a hammer!

  15. #29
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    When one can play in the shed at one's passion, who gives a toss about quarantine isolation issues

    I've had so much shed time that I have stop every couple of days to clean up the mess...

    Keep enjoying the shed time Alan while following the government guidelines to isolate...

    Cheers, Peter

    PS - The table is coming on nicely, well done on the one shot Australian Red Cedar...

  16. #30
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    The lugs to hold the table top on are actually a continuation of the legs but unfortunately they were ‘shredded’ when the old table top was removed due mostly to my ‘mystery nailer’. I have decided to make a subframe which will mount to the legs using what is left of the lugs and then the table top can mount to the subframe. This is the table top on top of the subframe and before the subframe was glued together...

    E7A85C4E-ED3B-4F50-A4B8-FD5CD69F45AA.jpeg

    The subframe needed cut outs for the lugs to pass through and these were cut with saws before the subframe components were joined...

    C2E5DC27-3676-49E8-BA75-AA11949FD454.jpeg

    One of the shelf supports was BADLY rotted and, due to the complexity of the ‘cracked ice’ bottom shelf which is joined to it, I didn’t want to risk removing the whole support so I put the table on the router table (!) and passed it over a parallel cutter until I had removed enough of the rotted timber to allow me to make and fit a new outer face. This photos show the process...

    6B1F6D58-55D7-44C9-8A44-4172B975BB34.jpeg 9688A285-1FBF-46E5-AF24-3E5DC45A29A3.jpeg 57BBEFD5-6EC9-4F86-9C93-DF6DCFCC4B52.jpg

    0D1E59BD-2532-4F21-A57B-24853939BE4C.jpeg 80E123DB-A3E6-448B-BFF4-5F19B63754E0.jpeg

    I then chiseled out the mitred ends of the old shelf support and came across some more of ‘mystery nailers’ handiwork...

    A1ABE907-2E86-4E2C-A88F-FD4D571EFD9F.jpeg F19978DF-0FB8-4829-8CEC-EA09032EA9FE.jpeg

    ... and then cut, shaped and glued a new outer face to the shelf support...

    7BF9D105-1EB0-4D79-B3BB-FE07E42B5269.jpeg 7CBE38FD-9C0E-44EA-A959-DF0E3F147A98.jpeg 9D78313F-8850-4BD3-84FD-3CB3A5BAF887.jpeg

    The shed would soon be filled with end-of-day light and so I thought I would roughly assemble the whole catastrophe and make up a colour sample while there was still daylight. The colour samples in the first photo (L to R) are Feast Watson brown Japan, oak and walnut and in the second photo I’ve put on a single coat of WOP on the sample pallet.

    6DA69440-8A95-469A-AB2B-27D3D3CD570E.jpeg 59A47D61-135A-4C12-BD47-59721CD6B1D0.jpeg

    The colour decision will be made tomorrow but it looks like a combination of brown Japan and oak?
    a rock is an obsolete tool ......... until you don’t have a hammer!

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Router (table) resurrection
    By fletty in forum ROUTING FORUM
    Replies: 11
    Last Post: 19th January 2020, 04:07 PM
  2. Table traverse for Chinese mill.
    By BaronJ in forum METALWORK FORUM
    Replies: 78
    Last Post: 18th July 2014, 06:48 AM
  3. Arbor moving on Chinese table saw
    By byacey in forum TABLE SAWS & COMBINATIONS
    Replies: 0
    Last Post: 26th September 2013, 03:08 AM
  4. Makita table saw - Chinese
    By ThornyBob in forum TABLE SAWS & COMBINATIONS
    Replies: 0
    Last Post: 12th September 2011, 01:41 PM
  5. Chinese Style Table
    By roland in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 10
    Last Post: 1st January 2011, 10:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •