Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
16th April 2010, 09:31 PM #1New Member
- Join Date
- Apr 2010
- Location
- United Kingdom
- Posts
- 8
In need of experienced advice with MDF please?
Hi everyone,
This is my first post as I have stumbled across this forum on Google. Basically I am relying on anyone's kindness and experience with MDF to help me out in this nick. I have a humidor, It dropped from a stool onto hard floor and the screws (which fix the quadrant hinges in) tore through the MDF slightly. Now when I open and close the humidor lid these screws move in and out and cause huge problems. Sometimes the lid even comes off.
For anyone who is puzzled what a humidor is they are wooden boxes to store cigars. My model is the one attached. I am assuming you know what quadrant hinges are and how they work. So I am looking for a solution to fix this problem, how can i fill in the MDF so when the screws are screwed in they stick?
A tremendous thanks for any ideas!
-Adam.
-
16th April 2010 09:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th April 2010, 10:03 PM #2
I'd use epoxy. For a small application like this, there's no need to go and buy a tub of the premium marine stuff, just a $2 pack from the local 'cheap crap from china' store.
Either fill the hole completely, let it set, then re-drill and re-insert the screw, or a smaller blob in the hole and screw the screw in and let it set. See here for way more info about using epoxy to bond hardware than you'll need to know for your job!
Just clean the epoxy off anywhere it shouldn't be before it sets!
-
16th April 2010, 10:31 PM #3
Usually pieces split from a wooden match, stuffed and glued into the hole are enough to allow the screw threads to lock back into place.
regards from Alberta, Canada
ian
-
16th April 2010, 10:44 PM #4New Member
- Join Date
- Apr 2010
- Location
- United Kingdom
- Posts
- 8
-
16th April 2010, 10:47 PM #5New Member
- Join Date
- Apr 2010
- Location
- United Kingdom
- Posts
- 8
-
16th April 2010, 10:49 PM #6New Member
- Join Date
- Apr 2010
- Location
- United Kingdom
- Posts
- 8
Oh and about the epoxy, is the smell pungent and toxic?
Thanks.
-Adam.
Similar Threads
-
Anyone experienced with ply?
By stonedpirate in forum BOAT BUILDING / REPAIRINGReplies: 34Last Post: 12th April 2010, 11:32 PM -
Experienced and likes to help
By Colourland in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 3rd July 2009, 11:28 PM -
Help needed from the Experienced
By cypher in forum WOODTURNING - GENERALReplies: 3Last Post: 13th June 2006, 09:59 AM -
Advice to all woodworkers, experienced and novice alike
By Grunt in forum WOODWORK - GENERALReplies: 11Last Post: 5th September 2005, 11:31 PM -
Hand saws - advice and experienced help required.
By Driver in forum HAND TOOLS - UNPOWEREDReplies: 19Last Post: 22nd September 2004, 12:06 AM