Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 22
  1. #1
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default Gate leg table from Victoria - Mahogany?

    Hi,
    This is something that was destined for the dump pit but mine now. I'm taking a guess it's mahogany but appreciate being corrected.
    I saw something with the hinges underneath having the same style of cuts and they said it was 1830. Could I be that lucky with this age?
    I applied metholated spirits and it certainly feels like shellac on the top. I was thinking of washing with warm water and Sunlight soap (learnt this from this site), any comment?
    I really want to clean the top up to get uniform colour ignoring the knocks and scrapes (patina).
    I normally work with blonde shellac to highlight silky oak but this is different.
    Any advice on how to get the same colour going where the wood has been exposed?
    For the broken hinge I'm looking at removing the pin and putting a good metal hinge there.

    Can anyone help me with the age and proper description of things like the legs?

    I've had to fix some modern furniture lately to sell. Just doesn't feel right. I always want to break it down and take to dump

    Appreciate how people on this site have taught me so much.

    Cheers,
    Nick



    Table base and legs.jpg 004.jpg 001.jpg 005.jpg Hinge.jpg Base blind dove tail.jpg Hinge leg good.jpg Hinge broken.jpg Base wood.jpg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    Remake the wooden hinge. Don’t replace it with a metal one. It would ruin the piece IMHO.

    I’ll post a link to Thomas Johnson repairing a gate leg card table. He had to make a new hinge so it might give you some tips.

    YouTube

  4. #3
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Thank you. I realised watching that I was learning something with every screen shot

  5. #4
    Join Date
    May 2007
    Location
    Sth Gippsland Vic
    Posts
    4,355

    Default

    Its not Mahogany . It could be Cherry.
    A picture of the cleaner looking middle top from underneath may be the best to see.

    Rob

  6. #5
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    This is the top cleaned last night under light. I'll try for underneath today.
    20200705_175120.jpg 20200705_175128.jpg 20200705_175221.jpg

  7. #6
    Join Date
    May 2007
    Location
    Sth Gippsland Vic
    Posts
    4,355

    Default

    Hmmm , Not so sure about Cherry either seeing those pictures . Still a possibility .
    Not so close, if you get a shot of the middle.

  8. #7
    Join Date
    May 2011
    Location
    Albury
    Posts
    3,019

    Default

    It's looking a little Australian Red Cedarish to me.

  9. #8
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Photo's
    1 : Top after cleaned with water
    2 : Side after cleaning
    3 : Edges with some shellac removed
    4 : Mild sanding of shellac
    5 : Scraping of shellac to wood only
    6: Shellac removed and cleaned with meths

    I have a lot of red cedar and feels to heavy for that.
    Before bare.jpg Bare 06.jpg Bare 05.jpg Bare 04.jpg Bare 02.jpg Bare 01.jpg

  10. #9
    Join Date
    May 2007
    Location
    Sth Gippsland Vic
    Posts
    4,355

    Default

    Looks as close grained as Cherry but cherry usually looks darker . Starts off Salmon pink and ends up darker and more rich with exposure to light. Then it fades back. I give up . Where its washed off it reminds me of stuff Ive seen on plywood faces. Not Hoop pine but a bit like that . Its a hardwood though not a pine , or is it ?

    Rob

  11. #10
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Well I'm committed to cleaning the shellac off now I think I'll experiment underneath with new blonde shellac to see how it looks. I did wet the area with meths and liked what I saw. Making the hinged joint will be a challenge and force me to learn more so it's around for a while. I wish I could determine a date for it.

  12. #11
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    6,127

    Default

    I'm with Rob on this; the grain and ring patterns look very much like Cherry, but something's just not quite right.... I don't suppose it's something like Kauri or NZ (Silver?) Beech?

  13. #12
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Hopefully one day I find out but I'm really glad to rescue it. I hope when completed SWMBO says yes it can stay.

  14. #13
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Finally scraped and sanded the top to reveal it all. I don't know how to control the camera colour control so I have put some white objects in the shots as well. I think the plan is to use shellac.

    20200707_165844.jpg20200707_165907.jpg20200707_165751.jpg20200707_165923.jpg20200706_161118.jpg

  15. #14
    Join Date
    Jan 2017
    Location
    Sunshine Coast
    Age
    64
    Posts
    212

    Default

    It does look like red cedar. If it is OLD red cedar, it may be heavier than YOUNG red cedar.
    It is very nice either way.

  16. #15
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Lighter than pine but heavier than the red cedar I have. Also doesn't indent with finger nail pressure but maybe old red cedar is denser? Definitely off the mark with the mahogany idea

Page 1 of 2 12 LastLast

Similar Threads

  1. Gate-leg Gaming Table / Calculating what wood needed for Project?
    By EagerBeaver71 in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 10
    Last Post: 16th July 2020, 09:55 PM
  2. Gate leg table in the making
    By powderpost in forum WOODTURNING - GENERAL
    Replies: 2
    Last Post: 12th August 2018, 04:45 PM
  3. Replies: 0
    Last Post: 11th March 2012, 01:12 PM
  4. Gate Leg Table WIP
    By fishflog in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 14
    Last Post: 12th March 2011, 08:19 AM
  5. Triton table saw $150 @ Bunnings Fountain Gate
    By TJC in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 7th July 2008, 10:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •