Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
1st July 2022, 01:09 PM #1New Member
- Join Date
- Jul 2022
- Location
- Dingley
- Posts
- 1
my first restoration mid century modern
His guys,
I am attempting (pics below / attached) on a pair of mid-century modern teak venner "
reliance furniture" bedside table and I am after some advice re process and products.
As the veneer is very thin I plan to light sand 240 grade sand paper or fine steel wool. I figure I don't need to use stripper.
I will need patch or replace the damaged veneer.
I am then no sure what products to use to finish it..
Do I use an oil or stain? I am looking to keep the original look as much as possible. Its also worth noting one of the bedside tables has faded slightly due to the sun.Bedside table 1.jpgBedside table 2.jpgBedside table 4.jpgBedside table 5.jpgBedside table 6.jpgBedside table 3.jpgBedside table 1.jpgBedside table 2.jpgBedside table 4.jpgBedside table 5.jpgBedside table 6.jpgBedside table 3.jpgBedside table 1.jpgBedside table 2.jpgBedside table 4.jpgBedside table 5.jpgBedside table 6.jpgBedside table 3.jpg
Should I put a coating to protect against water ring marks?
How do I colour the veneer to match as best I can?
As I said this is my first project so any advice would be welcome and suggestion of best products to use.
-
1st July 2022 01:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Mid-century Modern sideboard build
By Xanthorrhoeas in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 28Last Post: 2nd August 2017, 07:47 PM -
17th century Italian cabinet restoration
By rob streeper in forum RESTORATIONReplies: 15Last Post: 4th August 2016, 08:41 AM -
Mid century modern armchairs
By Tc03 in forum DESIGNS & PLANS FOR PROJECTSReplies: 1Last Post: 4th October 2013, 11:09 AM -
18th century Japanese 'kuruma tansu" wheeled chest restoration
By fudo133 in forum RESTORATIONReplies: 22Last Post: 17th May 2013, 01:14 AM