Raechell likes your comment. She laughed.
Ok this little black duck is off to bed. Night all
Dave TTC
Turning Wood Into Art
Printable View
And for Trevor.....Attachment 366293Attachment 366294
I'll take that Peter it's a big step up from "Trevor shows no aptitude". :U
Dave not taking Raech out to dinner in 7 years! "BAD COWBOY".
There'll be no Blue Wrens for a week for you young man!. :~
Cheers
Trev.
😢
Dave TTC
Turning Wood Into Art
Got the first of the barrel's quite a bit further along today.
Most of the time was taken up with sanding the taper on each of the fins.
Attachment 366331 Attachment 366332
I'll glue it all up tonight.
Tomorrow I'll finish off some shaping details around the pushrod recess's.
Then cut and fit the lower section of the barrel and add the base plate.
Cheers
Trev.
Looking good Trev. Coming along nicely. Are you going to bring whatever stage you are up to for show and tell at the gtg
Dave
The Turning Cowboy
That looks excellent Trev.:2tsup:
Charlie
Ah Ha, the build is officially under way.
I wonder how long before the can of body filler gets a workout?
Keep up the good work Trev.
Alan...
Not much point mate it wont be far enough along by then to be looking like much.
I would ask though if anyone going to the GTG has any off cuts of PVC pipe ranching in size from 100mm right down to the size of drinking strew it
would be greatly appreciated!.
Stuff like that is proving to be a little hard to find down here at the moment.
That's what I'm buying myself for a Christmas present!. :U
Cheers Guy's
Trev.
Ill put the word out local. Mate of mine is good on the scrounge. Post it on the gtg thread too
Dave TTC
Turning Wood Into Art
I got to through around some bodyfiller and house paint today.
The fins and cylinder sections are glued up and I've given them two coats of paint to fill in the joints.
The excess paint will be sanded off tomorrow before giving it all a spray of primer.
Attachment 366411 Attachment 366412
I'd under cut one of the fins and needed to shape it back out to get the alignment right.
The piece I've added on is marked with the arrow.
Attachment 366413 Attachment 366414
On the cylinders of the Brough there's a raised mound on the back for the base plate.
I have no idea why it's there but I've formed it out of bodyfiller.
Attachment 366415
Cheers
Trev.
Holy CARP! The bike's almost finished, I should have paid more attention. :D
Hope that's the same coke can from the Indian
Dave TTC
Turning Wood Into Art
I was thinking I've seen that can before.
Trev did you make the can to confuse us all??
Matt