Needs Pictures: 0
Results 1 to 4 of 4
Thread: Holding Crosses are like a toy?
-
17th November 2023, 08:14 PM #1
Holding Crosses are like a toy?
Ladies & Gents,
I’m making a batch of “Holding Crosses” for my old Navy Retired Chaplin friend.
The chaplain at the retirement village were he & his wife live asked if anyone know a woodworker who could make a dozen large & a dozen small “Holding Crosses” for the high care folk.
My old Navy Retired Chaplin friend organised a couple of photos with measurements; a larger one for big hands and a smaller one for smaller hands.
So long story short, Papa Smurf, Handy Smurf and I are making the “Holding Crosses”.
We did a mixture of timbers and thicknesses using up offcuts awaiting a project!
Thank you Jan [aka Dutchy] for reminding me of "Kustoms Creations" as a finish option.
I wasn’t sure what or if Scott made a suitable product, so I rang him telling him what and why I was making the crosses.
He said he made a liquid beeswax which will do the job.
I spent a good few hours doing the shaping/sanding on the crosses, but then my bobbin sander stopped.
IMG_3136.jpg
Upon investigation I found the brushes shot so have had to order a new set which will take 3-4days to arrive, bother!
Meanwhile, I ordered the Kustom Creations "Liquid Beeswax".
The Bobbin Sander was repaired along with a stack of hand sanding then finally the Kustom Creations Liquid Beeswax, 2 coats both sides.
This week I finally delivered them.
Cheers Peter
IMG_3415.jpg
IMG_3414.jpg
IMG_3413.jpg
-
17th November 2023 08:14 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th November 2023, 09:40 PM #2
Nice gesture and beautiful array of woods. Well done
Dallas
-
17th November 2023, 10:02 PM #3
-
18th November 2023, 05:16 AM #4Senior Member
- Join Date
- Jan 2019
- Location
- Christchurch New Zealand
- Age
- 81
- Posts
- 307
Hope you didn't use foul language when sander stopped had same problem with table saw, great looking crosses you have made.
Similar Threads
-
Noughts 'n' Crosses
By John1410 in forum WOODWORK - GENERALReplies: 0Last Post: 24th September 2018, 10:25 AM -
3 Crosses
By BigDBigD in forum WOODWORK PICSReplies: 5Last Post: 5th June 2014, 01:54 AM -
When the Dark Side crosses the threshold ...
By Green Woodchips in forum HAND TOOLS - UNPOWEREDReplies: 9Last Post: 15th August 2005, 11:46 PM -
Carbatec crosses to the dark side?
By simon c in forum Links to: TIMBER & HARDWARE SUPPPLIERSReplies: 8Last Post: 10th August 2004, 01:14 PM