Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 21
-
13th December 2012, 07:38 AM #1
Recovered and back in the shop...
After a few weeks with a cast on my left hand, the doctor said it it looked OK, and removed the damn thing. She said I"d take is easy for a few weeks... That afternoon I was allready in my workshop and starting on a new bus, commisioned by a friend. The model's drawings I posted some time earlier. It starts with a bottomplate of 90 x 250 mm, 8 mm thick. Glued on are two frame parts, 20x12 mm with the holes for the axis. Then the sides are made, wiht the windows cut out. Between the sides comes the front and back, untill here it's easy.The dashboard and steering support are set in place, along with a small reception table. Only then you place the driver's seat. Leave some room fot the wheel! The benches are made of 22x22mm, cut at an angle of 15°. The back af these benches are 50 mm high. The driver's seat is a bit higher and rouded on top. The the sunscreen is placed. After that a roof on top of the bus... The finishing I'll post the next time...I've changed the design a bit: on the left side there's a drivers door, and the right side door has been placed a bit futher to the back...
-
13th December 2012 07:38 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th December 2012, 11:51 AM #2
Bus Stop
Great work Leo.
One question.
How on Earth do you keep such a neat and clean work shop?
Mine looks like the aftermath of a cyclone, bits of sticks, dust and debris everywhere.Handmade Wooden toys Sunshine Coast Queensland
-
13th December 2012, 01:41 PM #3Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Top effort there Leo!!
I know how frustrating a cst is. I had mine off today but as the
thumb is in need of physio I can't do anything for another 6 WEEKS.
-
13th December 2012, 04:21 PM #4Senior Member
- Join Date
- Jan 2011
- Location
- shep Victoria
- Age
- 97
- Posts
- 421
Hi good to see you fit and well even if you are still sore you are still doing a good job on the model keep at it
Eddie.
-
13th December 2012, 06:13 PM #5
Don't over do it
Don't over do it Leo and muck up the return to the shed.
You've done a great job on the bus; beaut photos, thank you.
Cheers, crowie
-
14th December 2012, 08:00 AM #6
-
14th December 2012, 08:03 AM #7
-
14th December 2012, 08:07 AM #8
Thank you
Thank all of you for the wishes. Next week I hope the bus is finished and I will post the rest of the photo's. Is it costumary to do this as a reply on this tread or start a new one? Also, as I load up new photo's, in the popup-window all the previous pictures are still there. Can I remove them, cause it's a bit confusing?
-
14th December 2012, 08:14 AM #9
-
21st December 2012, 07:07 AM #10
Continuing: the bus
Here's the rest of the pictures: I added the mudguards and bumpers, along with head- end taillights. Mudguards and bumpers are 4 mm hardboard, the lights 12 mm and 8 mm diam. Since it was commissioned for a gift, a date and name are on the sides.
-
21st December 2012, 08:51 AM #11
Great work John....
Great work John....your bus looks very good.
You sure do top work with ply, well done.
Cheers, crowie
-
21st December 2012, 08:58 AM #12
Heyyy- nice job.
I wish my local bus was that cleanCan you imagine what I would do if I could do all I can? -- Sun Tzu
-
21st December 2012, 09:56 PM #13
Leo, that is one nice looking little bus mate!! You obviously have a better supplier for your ply. The stuff they sell down here is really rubbish, soft and with loads of holes. Very expensive too!
Someone is going to have fun with it this Christmas.
How do you do your wheels. If you don't have a lathe and would like some turned for you then just yell.My ambition is to grow old disgracefully. So far my ywife recons that I'm doing quite well! John.
http://johnamandiers.wixsite.com/johns-w-o-w-1
-
22nd December 2012, 02:59 AM #14
Little bus
Thanks for the compliments.) My supplier has a good eye, and he can choose anythting he likes (for free!). The wheels I do with a hole saw, but I plan to buy a small lathe next year, for better results. Anyone has experience with the Proxxon lathe? Besides,I think it would be rather expensive wheels if you'de send them to me in Antwerp...
-
22nd December 2012, 06:54 AM #15GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
If you need productive physio for your hands, there is little that can match some fairly intensive classical guitar lessons.
I tell ya, it hurt at first, lots of stretching when you get into pos. II. So I pace myself with faster 5-string blue grass banjo picking. Torn tendons & ligaments (7 weeks in a splint), split bones, hyper extended fingers, lots of aches and complaints.
Similar Threads
-
Shop-made edge sander, Shop Notes #37 article
By Jonthechippy in forum Links to: BOOKS, VIDEOS & PLANSReplies: 3Last Post: 14th June 2006, 05:10 AM -
I have recovered some sanity. A large square this time.
By Schtoo in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 14Last Post: 20th January 2006, 01:00 AM -
How Cars are Recovered in Ireland :)
By Wayne Davy in forum WOODIES JOKESReplies: 28Last Post: 8th June 2005, 10:10 AM -
Looking for Redgum Railway Ties (recovered) Resource
By barrysumpter in forum TIMBERReplies: 11Last Post: 7th February 2004, 11:10 PM -
Looking for Recovered Merbou or Jarra
By barrysumpter in forum TIMBERReplies: 7Last Post: 15th January 2004, 03:09 PM