Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Rocking Horse @ Christmas
-
2nd February 2013, 05:44 AM #1Hobbyist
- Join Date
- May 2009
- Location
- Canberra
- Posts
- 73
Rocking Horse @ Christmas
This is the rocking horse that I made for my grand daughter for Christmas.
I bought the plans, hardware and head from Enjoy Making Wooden Toys (Phillip Faram).
The head Phillip provides has great detail, whereas the plans only identify a blank head of four 19mm laminates with no detail - obviously if you are creative you can sculpture the head detail as you wish.
I changed the base design recessing the cross members into the longitudinal beam rather than resting the longitudinal beam on top of the cross members.
A most enjoyable project, sanding down to 400 grit and finished with ubeat natural wax.
Thanks for looking.
Ray
-
2nd February 2013 05:44 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd February 2013, 01:00 PM #2
Looks great Ray - Well done....Cheers, crowie
-
2nd February 2013, 05:23 PM #3
Hey Ray that a damm fine horse you have made. Whats next.
Phil
-
4th February 2013, 12:17 AM #4
Similar Threads
-
My Rocking Horse (WIP)
By mcatal01 in forum TOY MAKINGReplies: 27Last Post: 6th December 2012, 04:56 PM -
Rocking Horse
By Prime mover in forum TOY MAKINGReplies: 4Last Post: 5th September 2011, 03:14 PM -
rocking horse
By channa in forum WOODWORK PICSReplies: 13Last Post: 16th December 2006, 07:32 AM -
Rocking Horse
By MICKYG in forum WOODWORK - GENERALReplies: 2Last Post: 8th February 2006, 10:16 PM -
Rocking Horse
By Chesand in forum WOODWORK PICSReplies: 7Last Post: 8th January 2006, 11:17 PM