Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 104
-
16th June 2014, 09:03 AM #16
Thank you Dallas, Keith, Arthur, Graham, Mike & Bret......very much appreciate the kind words and YES we/I do learn from my/our mistakes.....
Part of the reasoning for confessing and highlighting them is/was to help others who might do the project see how I've tackled the mistakes/errors..
The one issue I didn't originally mention is that when I printed off the patterns of the plans, they were some 5-10% small than the actual required measurements. I had to copy the printouts the with some trial and error method managed to up-scale the pattern to the correct measurements. I then went across the whole plan filling in all the additional measurements to complete the plan so I didn't have to rely on the pattern to draw out the plan of each specific part. I'll scan and save this information for anyone who'd like a copy.
Today was a little cool at 6.30am but now 8.00am the sun is streaming into the house with 19-20deg"c" expected; after some chores & trip into the town I should have some shed time to continue on with the bobcat...
Cheers, crowie
PS - Can't blame a little mate for my mistakes.....
-
16th June 2014 09:03 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th June 2014, 10:26 AM #17
ply and holes
Peter I think I would use ply arms that short cross grain will only give you grief.
When I drill near the end of something I drill first then cut it out no splitting timber that way.
"If you dont do anything you dont make mistakes"
Phil
-
16th June 2014, 06:49 PM #18
-
16th June 2014, 07:07 PM #19
Not a lot of progress today after spending 1.5hrs in town delivering "Car Boot Sale" Fund Raiser fliers for the Local Boys & Girls Club to a whole heap of local shops .... the funds will be used to get a squad of 20 gymnastics to Helsinki next July for the International Gymnaestrada, Display Festival ..... some 25000 - 30000 participants over 10 days which only happens every 4years.....
I did a lot of sanding plus routed all the edges that the plan said to do....got to love the 1/8" round-over bit on a Dremel Router table..
The biggest job was to shape the bevels, then glue the bucket before sanding it....
Tomorrow is the usual Tuesday morning medical appointments so may not get back to it until later in the week...
Cheers, crowie
-
16th June 2014, 08:59 PM #20
Great to see another episode in the Crowie & Handy's Toys For All series!
Honestly mate you must have the best sandpit in the world.
Looking great Crowie.
Cheers
Trev.
-
16th June 2014, 09:25 PM #21
No sandpit Trev, but the grandsons drive them all over the house fill tip truck & farm truck with blocks or Lego or connecting up the crane or tow truck along with the lowloaders... they have a ball, and so do I just watching them play...good for the soul... Cheers Peter
-
16th June 2014, 10:55 PM #22
I hope you're not away from the job for too long otherwise Handy might get up to mischief, and we need another installment.
I don't get much time to play during the week so I need you to give me my fix.
A few of us from our club are going to a local Scout group on Wednesday night to do a demonstration, and help them put some kits together. This is also good for the soul.Dallas
-
17th June 2014, 04:28 AM #23
-
17th June 2014, 08:59 AM #24
make your own ply
Peter if you cant get good ply, put a piece through the planer so it is a bit thinner and glue them together on a cross grain with each other, you get a strong arm for the bobcat that way.
Phil.
-
17th June 2014, 09:46 AM #25
Great build so far. Thanks for doing the build thread. I like some of Wood's plans they are pretty easy to follow and it's fun to look for where you can modify/improve on them. Be watching this with great interest.
-
17th June 2014, 04:16 PM #26
-
17th June 2014, 04:18 PM #27
-
17th June 2014, 05:54 PM #28
I got home early enough to have an hour in the shed BUT SORRY no photos today...
I'm going to use & modify Phil's suggestion, but with the same timber as the bucket, not merbau so as to no to introduce another timber.
The timber is very pretty and old; it machines/cuts beautifully into thin 3/4" strips of 1.3 to 2.0mm thick for laminating/gluing to the inside of each arm. The arms will end up between 11-12mm thick.....
I will though have to remake the arm corner braces in the same timber...
Here's the old thread of how I sourced/scored this timber with the reference Bret found on the history on "wikipedia"...
https://www.woodworkforums.com/f174/bunch-free-100-timber-145998
http://en.wikipedia.org/wiki/Mason_and_Hamlin
Tomorrow is gardening day at our daughters with my darling wife, Tracey; but I may get a little time in the afternoon to do some more and hopefully with photos plus Handy's assistance of course...
Cheers, crowie
-
17th June 2014, 05:56 PM #29
Just a thought...maybe someone could identify the species of timber in the bucket for me, please...Thank you advance. Cheers crowie
-
18th June 2014, 06:01 PM #30
Apologies again - but no photos today...
Apologies again - but no photos today...
I did get an hour in the shed this afternoon were I ripped a 3mm strip of the Boston Organ timber and remade the arm braces...
I cut & glued/laminated the the same timber in 1.3mm strips along the inside edge of the bucket arms....it's now clamped awaiting the glue to dry....
Once it's dried, I'll sand it and possibility run the arms through the router again....
Maybe a photo of the finished arms tomorrow....
Has anyone any suggestions on the timber species yet???
Cheers, crowie
Similar Threads
-
Mobile Crane from Construction Series of Wood Magazine with a couple of modifications
By crowie in forum TOY MAKINGReplies: 85Last Post: 1st March 2014, 09:16 AM -
Pallet skid
By Rum Pig in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 25th January 2010, 01:19 PM -
My jigs are going to Wood Magazine
By niki in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 34Last Post: 2nd September 2007, 12:36 AM -
Article from 'Wood' magazine
By Johnno in forum WOODWORK - GENERALReplies: 5Last Post: 7th August 2001, 12:16 PM