Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 15 of 15
  1. #1
    Join Date
    Sep 2019
    Location
    Kinglake, Victoria
    Posts
    18

    Default G’day, looking for machine advice & a bit about me.

    G’day all,

    Great forum & community here - I’ve been a lurker for a while and thought it’d be about time I join you all properly.

    About me - I’m 30, living in rural(ish) Victoria.
    Love fishing, camping & I’m also a big chainsaw enthusiast (you gotta be when you burn 4 cord every winter!)

    Im a carpenter for a crust and am passionate about using reclaiming & recycled timbers. The old man is a retired mud brick/post & beam builder so it’s in my blood I guess.

    Now, the reason I’m posting for the first time..

    I’m getting into making barn doors & have decided to take the step to buy a planer/thicknesser, I’m looking to spend about $1500 on a second hand unit and would really love to chat to some members that can point me in the right direction on what would be a good machine to look for. Ideally I’m looking for a machine that take the largest width timber possible (who doesn’t love big timbered barn doors, right?) but am aware that budget & 240V are limiting factors.

    Cheers mates!
    J

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    68
    Posts
    2,335

    Default

    Welcome to the forum.

  4. #3
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,470

    Default

    Hi and welcome, personally I think you will be way under budget, you need to double it $3000, planer thicknesser's are not that common, and because of there complexity ten to command higher prices
    you may find it less out lay to buy separate machines i.e. buzzer/jointer plus a thicknesser

    Ballarat - wood thicknesser

  5. #4
    Join Date
    Feb 2018
    Location
    Victoria, Australia
    Age
    69
    Posts
    101

    Default

    Welcome to the forum J. Hope you enjoy your stay.

  6. #5
    Join Date
    Sep 2019
    Location
    Kinglake, Victoria
    Posts
    18

    Default

    Ahh that’s disappointing then.

  7. #6
    Join Date
    Jul 2004
    Location
    Adelaide
    Age
    76
    Posts
    768

    Default

    Welcome to the forum.

    Regards
    Keith

  8. #7
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default

    Welcome to the forums. I agree with China about budget, but don't give up hope yet. Unfortunately, some of the best bargains will be in 3-phase machines. My father-in-law gave away a whole workshop of such machines a few years ago as no one wanted to pay for them, even though he had run a successful joinery business with them for 30 years. There are ways to use those on 240 V with a VFD I believe, but VFD units aren't cheap either.

    If you do go for separate machines it is important to look for heavy-duty cast iron machines as the light-weight bench top units, although good for a hobbyist, will not survive heavy duty use.

    Some of the heavy-duty Chinese machines such as made for Carbatec etc. seem to be pretty solid, but in my experience the Austrian machines, like Felder and Hammer are the most reliable. Italian, like SCM, produced some decent gear too. Some older Swedish (I think) machines like Luna are still giving good service but I'm not sure that parts are available.

    Have a look in the forums here for old machinery - there are enthusiastic and knowledgeable restorers there who love the old gear and may be able to assist you with one of those multi-tonne monsters.

    Good luck,

    David

  9. #8
    Join Date
    Sep 2019
    Location
    Kinglake, Victoria
    Posts
    18

    Default

    Quote Originally Posted by Xanthorrhoeas View Post
    Welcome to the forums. I agree with China about budget, but don't give up hope yet. Unfortunately, some of the best bargains will be in 3-phase machines. My father-in-law gave away a whole workshop of such machines a few years ago as no one wanted to pay for them, even though he had run a successful joinery business with them for 30 years. There are ways to use those on 240 V with a VFD I believe, but VFD units aren't cheap either.

    If you do go for separate machines it is important to look for heavy-duty cast iron machines as the light-weight bench top units, although good for a hobbyist, will not survive heavy duty use.

    Some of the heavy-duty Chinese machines such as made for Carbatec etc. seem to be pretty solid, but in my experience the Austrian machines, like Felder and Hammer are the most reliable. Italian, like SCM, produced some decent gear too. Some older Swedish (I think) machines like Luna are still giving good service but I'm not sure that parts are available.

    Have a look in the forums here for old machinery - there are enthusiastic and knowledgeable restorers there who love the old gear and may be able to assist you with one of those multi-tonne monsters.

    Good luck,

    David
    G’day David,

    Mate, thanks for the insight - it’s exactly what I was hoping for when I joined the community. I agree with cast iron & will look into the brands you mentioned. New/old does not bother me whatsoever!

    Thanks for your input, it is very much appreciated.

    Jake

  10. #9
    Join Date
    Sep 2019
    Location
    Kinglake, Victoria
    Posts
    18

    Default

    Well, I’ve upped my budget to $2500 or so, so hopefully I can find something.

  11. #10
    Join Date
    Sep 2019
    Location
    Kinglake, Victoria
    Posts
    18

    Default

    I’ve tried posting in the ‘wanted’ section but it keeps telling me I need to add a title prefix & have no idea how to do it!

  12. #11
    crowie's Avatar
    crowie is online now Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    G'Day & Welcome to a top forum.
    There are quite a stack members around Melbourne and cross Victoria plus the rest of the country.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork......
    Cheers crowie

    PS - Watch out for local forum members get togethers to met up with and network....

  13. #12
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    When you place a new post there is a drop down Prefix menu. Hit the down arrow on the side of that menu and select one of the choices eg, “Wanted NSW’ or “ Wanted Vic”. Etc.

  14. #13
    Join Date
    Jun 2015
    Location
    Mexico. Actual Mexico not Victoria.
    Posts
    418

    Default

    Welcome to the forum J.

    I can appreciate the want for a machine that can do wide timber, however, what exactly do you consider wide and what sort of access and cost do you have to that width of timber?

    Personally I've collected a # tonne of timber and the majority, by a long way, is less than 330mm. So I bought myself a DeWalt DW735 thickie and shoved a helical head in it, total all up $1700. I made input and output conveyors for it as well as a sled that turns the thicknesser into a planer for about $200, happy days. The rest of the wide timber I have will either get broken down to fit the gear I've got, or I'll make slabbie stuff with it, personally I prefer the former.

    Just a thought.

  15. #14
    Join Date
    Sep 2019
    Location
    Kinglake, Victoria
    Posts
    18

    Default

    Crowie, Lappa, Feckit - thanks all for responding & saying G’day!

    I’ll be sure to checkout local meet & greets - I’m keen to meet some likeminded folk. In the meantime I’ll post any WIPS I have. (Does an HJ75 restoration count?!)

    Thanks for the prefix info too Lappa.

    Feckit - I have access to a lot of reclaimed timber & seasoned slabs. Oregon & ironbark specifically which range from 200x100 to 350x75. I also would like to rip a few small Blackwood slabs down the guts, pass them through the thicknesser and re-assemble for vanity units and shelving. I’m aware that hardwood will take a LONG time to cleanup in the thickie but I’m patient in that regard.

    I’ve accepted the fact that I’ll need to drop about 3K on a thicknesser and planer but really need to get some feedback on the best units that are out there for that price point.

    I’m eager to purchase and start putting in some hours.

  16. #15
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    3,495

    Default

    welcome to the forum

Similar Threads

  1. G'day from an old chippy
    By Charlee43 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 10
    Last Post: 20th March 2014, 12:59 PM
  2. A Chippy's Answer
    By Old-Biker-UK in forum PHOTOGRAPHY
    Replies: 3
    Last Post: 20th November 2013, 03:38 PM
  3. I Want a Chippy Tea
    By pmcgee in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 0
    Last Post: 13th April 2013, 06:52 AM
  4. Hey everyone, newly qaulified chippy here ineed of some advice from the pros.
    By milwaukeeman in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 11
    Last Post: 1st July 2012, 08:27 PM
  5. another poor chippy
    By doods in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 23rd July 2010, 10:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •