Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    Jan 2009
    Location
    Townsville, Queensland , Australia
    Posts
    3

    Default G'day from Townsville

    Hello all,
    I've been woodworking as a hobby for several years now, mostly turning timber into shavings and occasionally finishing a piece of furniture. Aside from an old triton saw bench I use hand tools, also old, which I enjoy but are very slow.
    I'm contemplating getting a bandsaw both for general crosscutting, shaping and ripping and for resawing small pieces of timber. Much of what I use is recycled so needs to be broken down to smaller sizes.
    In one of the older reviews the Sheppach basato 4 seems to come out well as a mid sized saw. Can anyone offer a opinion on this or one of the Jet or carbatec saws? Allan at the Townsville Jet shop is very helpful but I have little experience with machinery so would welcome any advice.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    Welcome to the forum. I have a 14inch Carbatec bandsaw myself. Find it ok but would prefer to have a much smoother table.

  4. #3
    Join Date
    Jul 2011
    Location
    NC,USA
    Posts
    51

    Default

    Welcome!!

  5. #4
    Join Date
    Mar 2009
    Location
    Brisbane, Australia
    Age
    52
    Posts
    293

    Default

    WELCOME!

    Mate, I am pretty new to this woodwork lark but have done an awfull lot of research and looking at machines of all shapes and sizes.

    In my opinion Jet is better than Carbatec stuff but I have a nagging voice that says is it worth the extra 400-500 bucks.

    The low end 14' carbatec bandsaws in my opinion are junk, the are flimsy and there is no heft in them at all.

    I would go a 14' Jet anyday of the week over a 14' carbatec.....

    I picked up a 14' Delta which the Jet is virtually the same and it rocks!! I have a 3/4 inch bi metal blade in mine and it rough cuts anything I throw at it, I haven't put a riser kit on mine which I am tossing up whether to do it or not cause I am limited with resawing width.

    If you want performance and you want to buy carbatec then you have to go their 17' bandsaw, then you are getting value for money vs performance.

    just my 2 cents....

    Goodluck

  6. #5
    Join Date
    Jan 2009
    Location
    Townsville, Queensland , Australia
    Posts
    3

    Default Thanks all for your replies

    Thank s all for your replies,
    Sounds like as always you get what you pay for. I'll probably save up for a larger saw.
    Pardon my ignorance but what is a riser kit and what does it do?

    Regards,

    Ben

  7. #6
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    83
    Posts
    10,027

    Default

    G'day and welcome
    Reality is no background music.
    Cheers John

  8. #7
    Join Date
    Dec 2008
    Location
    Ingham. Qld
    Posts
    20

    Default Riser ????????

    Hi Ben,
    Welcome to the club, [as I said to my first wife when she got preggers]
    I have only been as you say making shavings for two years now.
    A riser is an extention or spacer that you bolt onto your saw frame to increase its height hence increasing the size of your saw,typically used on 12 inch saws which gives them the sawing size of a 14 inch,research risers if you are contemplating going that way as there are pros and cons for and against.
    I have a Jet 14 inch saw which I would not recommend, on saying that the model I have sems to be in the minority, it is like a cabinet style saw, as opposed to the normal cast iron frame design,this frame is pressed steel,also I can not but blades off the shelf for it,the other Jet saws are probably better as I too have heard good things about them,thats why I bought this one.
    I live up in Ingham if you wish we can keep in touch always good to have another woodie to moan to .
    All the best Ben and kind regrds.
    Tom.

  9. #8
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    3,495

    Default

    G'day and welcome

  10. #9
    Join Date
    Jan 2009
    Location
    Townsville, Queensland , Australia
    Posts
    3

    Default Thanks for the Riser explaination

    Thanks Tom,
    Yes it would be good to keep in touch, the only local woodworker group I know of is the woodturners club. Always helpful to bounce ideas around, and ask advice.

    Regards,

    Ben

Similar Threads

  1. G'day from Townsville,QLD
    By MrFitzy in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 10th March 2011, 08:14 PM
  2. G'day from Townsville
    By Aitcho in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 1st July 2010, 08:09 AM
  3. Townsville
    By turnerted in forum WOODTURNING - GENERAL
    Replies: 1
    Last Post: 27th May 2010, 06:56 PM
  4. Who is from Townsville??
    By Spanner69 in forum WOODWORK - GENERAL
    Replies: 14
    Last Post: 30th March 2009, 04:48 PM
  5. Hi from Townsville
    By Spanner69 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 8
    Last Post: 10th February 2009, 08:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •