Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: TORMEK SVD-186 Gouge Jig upgrade
-
28th February 2016, 11:32 AM #1
TORMEK SVD-186 Gouge Jig upgrade
Well they are finally here the all new Tormek SVD-186 Gouge Jig.
This replaces the SVD-185 jig which worked very well but as with all things Tormek they are always looking at improving.
The SVD-186 has a larger opening so can accomodate a gouge up to 32mm and the new clamp piece can hold the smallest of tools.
Probably the best upgrade is the dedicated indents on the angle setting, now if you want the No 2 setting you get a definite indent the same with all other settings.
Tormek have made a good jig better.
Have a look here.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
28th February 2016 11:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th February 2016, 01:10 PM #2
Jim, you can always send one up to me for "quality" testing . . . should only take me a decade or so
Pat
Work is a necessary evil to be avoided. Mark Twain
-
28th February 2016, 01:26 PM #3
Sorry Pat did not think to check with you first.
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
28th February 2016, 02:30 PM #4
That looks nice. Hope someone is goi g to jave one at Fletty's sharoening workshop in a couple of weeks
Is it a postive lock at 0, 2, 4 ,6 or just marked numbers as a guide? Tried zooming in on your site but could not make it out.
Dave TTC
Turning Wood Into Art
-
29th February 2016, 12:44 PM #5
Dave it has positive indents so no guessing where you are or if you have the correct position.
Just another way of making sure you get that Tormek repeatabilityJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
29th February 2016, 01:22 PM #6
Ill post a link to this thread in Fletty's sharpening workshop thread.
Hopefully someone orders one for the event
Dave TTC
Turning Wood Into Art
Similar Threads
-
Tormek T7 and roughing gouge
By TongueTied in forum SHARPENINGReplies: 5Last Post: 12th December 2015, 06:53 AM -
Tormek Gouge Jig - manufacturing error
By rsser in forum WOODTURNING - GENERALReplies: 51Last Post: 24th December 2009, 10:03 AM -
Tormek Gouge Jig - manufacturing error
By rsser in forum SHARPENINGReplies: 1Last Post: 5th November 2009, 08:22 AM -
Ellsworth Gouge & Tormek
By Exalibur in forum WOODTURNING - GENERALReplies: 10Last Post: 15th February 2005, 04:19 AM