Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
16th January 2014, 03:15 PM #1
Woodcut 250mm x 40mm x 12mm x 280g CBN Wheels
We have finally recieved our delivery of the 250mm CBN wheels that suit the wet grind style grinders, Tormek, Scheppack, Jet or Record.
These wheels are 280g so finer than the standard wheels that come with the Wet grind machines.
One advantage with these wheels is that you do not have to redress them as they dont go out of shape like the standard wheels, so no worries about using them to sharpen your gouges then flatten to sharpen your flat tools.
Another advantage is you can set your jigs to dedicated angles and not have to reset everytime you dress the wheel
Other sizes available for spark grinders as well available in 80 and 180g
Have a look hereJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
16th January 2014 03:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th January 2014, 08:46 PM #2
Mine's on it's way
Pat
Work is a necessary evil to be avoided. Mark Twain
-
23rd January 2014, 06:02 PM #3
My Torment with the new wheel. I had a little bit of difficulty removing the old stone, but some gentle persuasion with a lump hammer and 10mm pin punch . . .
Pat
Work is a necessary evil to be avoided. Mark Twain
-
23rd January 2014, 06:35 PM #4
Hi
just wondering do you still need the water with These wheels
Cheers Rod
-
23rd January 2014, 08:05 PM #5
Rod, I put just enough to cover the bottom rim of the new wheel to aid in swarf removal. Gaffa taped a dirt big magnet to the front of the water tank to assist in collecting said swarf.
Pat
Work is a necessary evil to be avoided. Mark Twain
-
23rd January 2014, 08:17 PM #6
Woodcut CBN wheels
They are designed to run dry on spark grinders.
On the wet ones like pat says they water aids removing the swarf awayJim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
23rd January 2014, 09:19 PM #7
Thanks for the answers
Looks like I may have to save up & buy one
Cheers Rod
Similar Threads
-
Should a 12mm wide mortise be chopped with a 12mm mortise chisel?
By Russell Cook in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 4th December 2012, 04:26 PM -
OPTIGRIND CBN WHEELS 150 x 40mm
By Jim Carroll in forum Carroll's Woodcraft Supplies - Something for everyone.Replies: 0Last Post: 29th March 2012, 03:41 PM -
iso30 40mm arbor
By azzrock in forum METALWORK FORUMReplies: 8Last Post: 26th June 2011, 03:25 AM -
how much can two 40mm axles carry?
By journeyman Mick in forum TRAILERS & OTHER FABRICATED STUFFReplies: 10Last Post: 13th March 2011, 10:11 PM -
40mm template Guides
By Tom O Donnell in forum ROUTING FORUMReplies: 0Last Post: 23rd April 2001, 09:24 AM