Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
25th August 2021, 02:19 PM #1Senior Member
- Join Date
- Jan 2006
- Location
- United States Of America
- Posts
- 194
Threaded depth adjuster tightened using a nut.
My bullnose plane depth adjuster machine screw was a little wiggly.
After adding thread lock I made sure the depth adjuster machine screw was fully seated and tightened into the plane body.
I had to reduce the outer nut size by filing the flats so it cleared the plane iron.
The nut was placed onto the depth adjuster machine screw and gently tightened.
No more side wiggle I doubt it will come unscrewed any time soon.
-
25th August 2021 02:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th August 2021, 02:47 PM #2
Nice bit of lateral thinking
The person who never made a mistake never made anything
Cheers
Ray
Similar Threads
-
Adjuster for Universal WA-14
By kungsleden in forum BANDSAWSReplies: 9Last Post: 6th May 2019, 08:36 AM -
Howard Adjuster?
By Luke Maddux in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 7th May 2015, 08:34 PM -
Where can I buy Affordable Acme Threaded Lead Screw & Flanged Acme Threaded Nuts
By RoyG in forum METALWORK FORUMReplies: 8Last Post: 1st September 2014, 12:26 PM -
The AYS Leg Vise Chain Adjuster
By derekcohen in forum THE WORK BENCHReplies: 3Last Post: 21st August 2012, 05:43 PM -
Stanley #6 plane - cant remove depth adjuster
By cor55 in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 1st November 2011, 04:11 PM