Needs Pictures: 0
Results 1 to 4 of 4
-
16th May 2021, 04:04 PM #1.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,788
Using a magnet to hold a faster in an awkward situation
I've been making SWMBO some accessories for her needlefelting hobby and today I was up for making a "reverse hand carder". "Reverse" just means the angled tips on the tines on the carding cloth are oriented opposite to the normal use direction.
Revcarder.JPG
The woodwork is nothing special a piece of 75 x75 x 20 mm timber with one of the larger surfaces curved and onto which the carding cloth is attached while the other side has a handle.
My fastener of choice were some small tacks but the dilemma was how to get in between the carding cloth tines to hammer them home. A punch seemed one way, but then how to hold tack/punch and hammer to get in between the tines. I've done something similar before with screws and a magnet on the screwdriver. Tried that - holds the tack nicely, gets down between the times nicely.
The hit punch with hammer but it stuck fast to the punch - of course
A handy hardwood mallet save the day but I could have used my Al and bass mallet as well.
I've made quite a few accessories and here are a few more
Tools2.JPG
-
16th May 2021 04:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th May 2021, 04:26 PM #2
Bob....you will be accruing plenty of brownie points with SWMBO. It will put you in credit so you may be able to get that next tool/machine. You are also demonstrating your versatility working with different mediums
Just do it!
Kind regards Rod
-
16th May 2021, 06:33 PM #3
Nice assortment.
May I ask whether she's a spinner or felter?
If a spinner, is she a knitter or weaver? (God have mercy on you if she's all of the above!)
Just asking so we know whether we can to expect to see 'warping boards and raddles' or 'niddy-noddys & lazy kates' emerging from your shop in the near future?
- Andy Mc
-
16th May 2021, 08:33 PM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,788
Similar Threads
-
Sometimes setups are so awkward
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 25th January 2021, 11:00 AM -
Awkward moment
By Allan at Wallan in forum WOODIES JOKESReplies: 1Last Post: 20th December 2014, 05:43 PM -
Two Awkward Pieces
By torchwood in forum WOODTURNING - GENERALReplies: 10Last Post: 31st January 2013, 08:40 PM -
Awkward gluing job....
By R. McCarthy in forum WOODWORK - GENERALReplies: 11Last Post: 9th March 2007, 10:52 AM -
More speed... Faster faster you fool you fool.
By soundman in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 0Last Post: 6th September 2006, 09:31 PM