Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: 8 x 6 trailer design
-
17th July 2021, 10:20 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,425
8 x 6 trailer design
Long time forum guest here
Trying to design an 8x6 box trailer to build myself with idea of ditching my ute so I can use the trailer on a Pajero - usually for crushed granite, gravel for concreting, rubbish, wood, etc.
was thinking build it to suit 1400 kg atm with single axle mechanical brakes - made from 75x50 rhs. With 2 mm floor and 1.6mm fabricated sides using 25x25mm angle as the framing. Would would like a h frame set up for lengths of timber and steel of course.
Though is it possible to build single axle 2000kg atm trailer? All I can find is tandems in this configuration. If able to do this what axle configuration and a frame size would I go for.
Also have available a set,of mk triton springs and an old 8x6 alloy tray - not a fan of these as end up too high when lifting heave items in and out. I am all ears thanks guys
Read and reply to the full thread at metalworkorums.com....
-
17th July 2021 10:20 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Looking for the ideal design for a 16' trailer-sailer.
By goanywhere in forum BOAT DESIGNS / PLANSReplies: 15Last Post: 23rd December 2015, 08:50 PM -
Engineering design question for tandem trailer
By surfin in forum TRAILERS & OTHER FABRICATED STUFFReplies: 22Last Post: 28th August 2015, 10:35 PM -
Enclosed Trailer design
By Avitus in forum TRAILERS & OTHER FABRICATED STUFFReplies: 39Last Post: 1st October 2012, 06:19 PM -
Tilt trailer drawbar latch - wot is best design
By jex in forum TRAILERS & OTHER FABRICATED STUFFReplies: 4Last Post: 2nd September 2012, 10:44 PM -
trailer design help
By welder in forum TRAILERS & OTHER FABRICATED STUFFReplies: 29Last Post: 13th May 2010, 10:23 PM