Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Adding a Cage to my Trailer
-
16th August 2019, 03:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
Adding a Cage to my Trailer
It occurred to me that a (removable) cage would be a handy addition to my little trailer, however, I've never looked at one close up to see how the corners are configured. Anyone have any links showing how a typical one goes together?
For starters, I assume you'd want sockets at each corner to receive corresponding legs from the side panels. I'm wondering if I'd need an additional socket along the side...
IMG_2803.jpg
Mine has these 50x50 uprights in each corner, I'm thinking I could cut out the checkerplate to expose the inside of the tube, and maybe add a hole at the bottom to allow water to escape.
Attached Images
- IMG_2803.jpg (137.2 KB)
Read and reply to the full thread at metalworkorums.com....
-
16th August 2019 03:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Metal cage
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 4th July 2018, 07:20 PM -
Cage for Trailer
By lnt9000 in forum TRAILERS & OTHER FABRICATED STUFFReplies: 14Last Post: 14th November 2012, 09:49 AM -
Empty Cage
By Rodgera in forum WOODIES JOKESReplies: 0Last Post: 16th March 2012, 08:45 PM -
Trailer Cage Problem - Advice Needed!
By UglyDan in forum TRAILERS & OTHER FABRICATED STUFFReplies: 7Last Post: 14th July 2011, 02:48 PM