Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Looking for gal PFC 75x40 Sydney
-
16th January 2024, 05:50 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,459
Looking for gal PFC 75x40 Sydney
Hey fellas looking for 2 length's 6 meter's or 1x 12 meter length cut in half 75x40 PFC channel must be galvanised, building a new tinny trailer, bending the channel in the press using homemade dies, and U bolting it together with 50x50x3mm shs for cross member's, current trailer is absolutely gone holes rusted right thru cross member's big holes in main chassis rail's i was lucky it made it to the new house
Attached Images
- 20240116_150032.jpg (249.3 KB)
Read and reply to the full thread at metalworkorums.com....
-
16th January 2024 05:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Hi there from Sydney
By stevecassidy in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 9Last Post: 6th July 2020, 06:52 AM -
G'day from Sydney
By Hoverman1977 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 3Last Post: 3rd March 2017, 01:35 AM -
Hey from Sydney
By timsydney in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 4th January 2017, 07:55 AM -
sydney woodcarving group celebrating 15 years of woodcarving in sydney
By nz_carver in forum WOODCARVING AND SCULPTUREReplies: 6Last Post: 25th November 2008, 12:27 AM