Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 43
Thread: Planning a bike trailer
-
17th May 2012, 01:22 AM #1Member
- Join Date
- Jan 2012
- Location
- Brisbane
- Posts
- 50
Planning a bike trailer
So I have a axle, springs, wheels and hitch off a old work trailer that I ended up scrapping. My plan for the leftovers is to make a trailer to cart some dirt bikes around. I started playing around on Sketchup tonight and I have a rough Idea on the design but it's just the size of the material I'm struggling to decide on. The aim for this trailer is to cart no more then 3 bikes at one time, each bike weighs around say 120kg plus fuel and gear, round it up to 460kg MAX. Most of the time it'll only have one or two bikes and no gear.
For the yellow section I was planning on using 75x50 but was wondering if 2mm would be strong enough or if I should use 3mm.
For the red section, If the yellow was to be 2mm I was thinking of using that as well since steel is sold in 8 meter lengths, 2 lengths would do it. If not I was thinking of using 40x40 for the red section as well as the rest of the trailer but again would 2mm be the best option. I'm trying to keep the weight down in the trailer as much as I can with out compromising safety. Also there will be sides on the trailer as well made from the same steel that I use for the blue areas.
-
17th May 2012 01:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th May 2012, 11:02 PM #2
I wouldnt bother going over 2.5 mm for your drawbar.
For the red section personalIy I would use 50 x 50, but thats what I usually have lying around. My dog camper trailer build used 40 x 40, but there wasnt that much weight in the trailer. My St Bernards were dieting that week .www.lockwoodcanvas.com.au
I will never be the person who has everything, not when someone keeps inventing so much cool new stuff to buy.
From an early age my father taught me to wear welding gloves . "Its not to protect your hands son, its to put out the fire when u set yourself alight".
-
19th May 2012, 09:15 PM #3Awaiting Email Confirmation
- Join Date
- May 2012
- Location
- Lismore
- Posts
- 26
I have a muti-purpose trailer I built initially for three bikes but I have since sold them.It has 75x50x2mm drawbar members & 50x50x2mm (red section members). Due to house reno's I seem to be moving more soil and gravel these days. I have loaded this trailer before with 1cubic metre of topsoil which I am told weighs about 1t. There has been no hint of movement or strain on this design. These days I only load 1/2ton on at a time which is a little bit less scary to transport.
-
19th May 2012, 09:40 PM #4
For a trailer this size just for motorbikes 75 x 50 x 2.0 would be fine, but if it's going to see double duty as a box trailer, I would suggest 75 x 50 x 2.5mm for the drawbar. You'd only need one length of this for the draw bar, and the leftover piece can be used for the rear cross rail. 75mm allows for more room for numberplate mounting and rear taillights. The rest, 40 x 2mm SHS will be fine.
Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
19th May 2012, 10:14 PM #5Member
- Join Date
- Jan 2012
- Location
- Brisbane
- Posts
- 50
Thanks for the reply guys, I've decided on the materials I'll use. 75x50x2 for the draw bar and 40x40x2 for the rest, and I'll pinch Yonnee's idea with using the RHS for the front and rear cross bars. This is going to be a 'bike only' trailer with a mesh floor and tracks welded in so no double duty for it, I already have a big solid box trailer for that kind of stuff.
-
20th May 2012, 12:55 AM #6
If you use the RHS for the front cross rail as well, the drawbar wont sit level, as the bottom of the front cross will be lower than the side rails.
Also, 2 x 2.5M = 5.0M, plus 1.2M = 6.2M, leaves only 800mm for the front cross rail...
I'd have the rear cross rail at 1600mm, having a 200mm overhang each side of the side chassis rails.Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
20th May 2012, 01:06 AM #7Member
- Join Date
- Jan 2012
- Location
- Brisbane
- Posts
- 50
Yea I was thinking about that. I read your build and was thinking about doing the same or I might get a length of 50x50 and use that as well. I need to finish off the plans first so I know how much steel I need to buy.
Also the 75x50 comes in 8 meter lenghts
-
20th May 2012, 11:38 AM #8Member
- Join Date
- Nov 2011
- Location
- sunny adelaide
- Posts
- 64
and dont forget pics pics pics as ya go along always a way to get ideas for other projects is learning off what other people are doing .
-
20th May 2012, 11:46 AM #9Member
- Join Date
- Jan 2012
- Location
- Brisbane
- Posts
- 50
Don't worry there will be plenty of pics
-
20th May 2012, 11:53 PM #10Member
- Join Date
- Jan 2012
- Location
- Brisbane
- Posts
- 50
While the wife was watching Downton Abbey (don't know if I spelt that right) I done up another plan, well kind of finished off the first one. I'm not set on the hight of the front yet (it's at 500mm), it's too cold to go out to the garage to measure a bike tyre to get the right height so I just left it at that. But thats the basic idea of it all. I have a few bikes in the garage that need work done to them before our next outing so I'll get that done first then I'll start buying some steel and make a start on this.
Yellow is 75x50x2
Red is 50x50x2
White is 40x40x2
-
21st May 2012, 02:12 PM #11Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
21st May 2012, 06:31 PM #12
Just having another look at your plans, and an 8 x 4 is a pretty long trailer for just carrying bikes.
The cheapies run a 6 x 4 chassis with the centre bike part way up the drawbar.
I've also just finished building one for a customer based on a 7 x 4 chassis.Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
21st May 2012, 08:45 PM #13Member
- Join Date
- Jan 2012
- Location
- Brisbane
- Posts
- 50
Yea I know it seems long but my box trailer is the same legnth and the back wheel on my bike only clears the tailgate by 7 inches or so. I want to make it like that so there is room for gear around the bikes and also on the draw bar as well, some of the rides we go on we camp as well so we sometimes need to take extra gear. I plan on putting the center bike on backwards as well (thats how we put the bikes on my box trailer) so I can keep the bike off the draw bar.
-
22nd May 2012, 12:14 PM #14
That's cool. Just be careful of the balance point/axle location. Ordinarily the front channel for the wheels is on an angle facing forward, putting the bikes further forward. Also, having the centre bike forward of the other two helps with towball load, so yours being all three level, you'll just need to be mindful of how far back the axle needs to be. If you're going to sling a spare under the drawbar, then ball weight shouldn't be a problem.
Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
22nd May 2012, 05:19 PM #15Member
- Join Date
- Jan 2012
- Location
- Brisbane
- Posts
- 50
I was going to find the balance points of the bikes before making a decition on axel location. Also I do have a spare to fit to the trailer so I might look at putting it under the drawbar.
Similar Threads
-
Hartley TS21 trailer sailer (no trailer) No reserve auction
By SimonP in forum CLASSIC BOAT RESCUE & ADOPTIONReplies: 0Last Post: 11th June 2010, 07:48 PM -
Silhouette mkii 5.3m 17' 6" trailer sailer inc trailer
By SimonP in forum CLASSIC BOAT RESCUE & ADOPTIONReplies: 0Last Post: 28th February 2010, 11:16 PM -
Bike and Trailer
By fenderbelly in forum CYCLINGReplies: 2Last Post: 29th October 2008, 08:58 AM