Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Query regarding bent towbar
-
6th August 2021, 09:50 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
Query regarding bent towbar
Hi all,
Just a quick question regarding a bent towbar, I noticed that mine has a slight bow in it on both axis.
I was planning on straightening it though thought I'd ask here first just in case it is meant to be like that.
Where the tongue is it bows in about 3.5mm and on the top face it protrudes about 1mm.
It is a hayman reece. Here are a some of photos that I have taken.
Any advice would be good.
Thanks
Sent from my SM-G935F using Tapatalk
Read and reply to the full thread at metalworkorums.com....
-
6th August 2021 09:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Bent Ply
By Nortova in forum TIMBERReplies: 2Last Post: 6th July 2018, 05:10 PM -
Bent Fence!
By REALOldNick in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 49Last Post: 19th April 2011, 05:00 PM -
bent gun
By david devine in forum WOODCARVING AND SCULPTUREReplies: 2Last Post: 4th July 2010, 06:43 PM -
A bent yard?
By nickpullen in forum Michael Storer Wooden Boat PlansReplies: 8Last Post: 3rd April 2010, 07:30 PM -
bent router bit
By John Saxton in forum ROUTING FORUMReplies: 0Last Post: 30th July 2004, 12:40 AM