Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
30th March 2013, 08:22 PM #1Senior Member
- Join Date
- Jul 2010
- Location
- Brisbane
- Posts
- 107
Slipper springs .. does this look right ?
Hi
Recently a friend purchased a second hand trailer and brought it to me for a once over and at first glance it looked OK..
Starting by pulling on a wheel i found it very loose !!..it has "New wheel bearings" !! my friend was told.
After closer inspection i was stunned to find the previous owner had fitted 16" Land Cruiser wheels onto the existing Holden stub axles !!!
Fortunately he hadn't done a lot of km's and the stubs were fine except for some burrs
I then noticed the fitting of the slipper springs. References show all ends of the spring entering their housing.. why this fellow left one out is worrying me.
Is it meant to be in with the others, or is it fine where it is ?
-
30th March 2013 08:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th March 2013, 08:31 PM #2
It should be in with the others, most likely backed into a gutter a bit too hard and it popped out.
Cheers
DJ
ADMIN
-
31st March 2013, 01:47 AM #3GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
DJ is right in that it should be in like the other, even a bad pothole can do it.
Kryn
-
31st March 2013, 10:19 AM #4
As DJ & Kryn have confirmed, the third leaf should be inserted in the hanger, although from the looks of it, it hasn't been in there for quite a while. Generally, the third leaf is separated from the other two at the end so that when all three are inserted into the hanger, they are much less likely to rattle in the hanger (particularly when the trailer is empty). While the way it is, is not detrimental to the spring while the trailer is empty, when loaded there will be quite a bit of weight just on the end of that one leaf.
Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
Similar Threads
-
Tension Springs
By NZStu in forum BANDSAWSReplies: 2Last Post: 29th August 2012, 05:19 PM -
Are my springs ok?
By tasgc in forum UPHOLSTERYReplies: 1Last Post: 30th May 2012, 11:08 PM -
Rear slipper spring is coming out
By Rat1314 in forum TRAILERS & OTHER FABRICATED STUFFReplies: 6Last Post: 11th May 2012, 11:19 AM -
Trailer springs
By Tigershark in forum TRAILERS & OTHER FABRICATED STUFFReplies: 2Last Post: 25th February 2010, 03:23 PM -
On the slipper slope - good news
By lesmeyer in forum FESTOOL FORUMReplies: 1Last Post: 24th December 2006, 07:06 PM