Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Tapered leaf springs
-
6th February 2009, 09:50 AM #1Senior Member
- Join Date
- Nov 2008
- Location
- Qld. Australia
- Posts
- 417
Tapered leaf springs
Bought a new, very cheap set of 1000KG trailer springs and discovered after, that they are a single tapered leaf. I've never seen them before, so my question is, how do they compare to the regular multi leaf? Better, worse or what?
Thanks
Nev
-
6th February 2009 09:50 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th February 2009, 11:24 PM #2Senior Member
- Join Date
- Mar 2008
- Location
- barwon heads
- Posts
- 147
i think their called parabolic springs work ok especially on boat trailer application where rusting occurs between leafs on a normal spring pack
-
9th February 2009, 04:23 PM #3
tlbsg has it spot-on. They're parabolic springs, and from memory they're made in Adelaide. Melbourne Trailer & Caravan Supplies down here carry them on the shelf. They're available in both black and galv'd.
If anything they're a little more forgiving when slightly overloaded as they don't have a hole drilled through the middle of them for a bolt.
Good spring, never had any dramas. Only ever seen one snap in half... surprise, surprise, over-loaded.Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
12th February 2009, 09:15 PM #4SENIOR MEMBER
- Join Date
- Nov 2005
- Location
- adelaide
- Posts
- 667
i use them on my boat trailer and no dramas so far and if i recall volvo trucks use them on the front springs
Similar Threads
-
Leaf springs for tool steel
By KRH in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 8Last Post: 25th January 2007, 08:00 AM -
Clamping tapered boxes
By mfseeker in forum WOODWORK - GENERALReplies: 3Last Post: 17th January 2007, 12:52 PM -
Tapered Peg Reamer - Now do I sharpen it?
By bitingmidge in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 15Last Post: 7th July 2005, 06:46 PM -
HELP - Jointer produces tapered boards
By Gazza in forum WOODWORK - GENERALReplies: 33Last Post: 22nd January 2005, 12:15 AM -
Table Tapered legs
By JackG in forum WOODWORK - GENERALReplies: 14Last Post: 3rd July 2004, 09:22 PM