Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: trailer sides needed
-
26th February 2012, 11:41 PM #1Member
- Join Date
- Nov 2011
- Location
- Gold Coast
- Posts
- 60
trailer sides needed
Hi All,
I have a old 6x4 trailer that im looking into converting it into a mowing trailer for some weekend work that i can pick up. Ive looked around on ebay and i cant seem to find where people buy new trailer side from? Im a good welder and i would prefer to strip down and rebuild the old girl propley with new sides? as for the rest of the add on's im sweet with scourcing them!
any help would be much appreciated
cheers tonner 355
-
26th February 2012 11:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th February 2012, 10:37 AM #2
Can't help with any specific contacts up there, but make some calls to some local sheet metal places. Trailer sides are basically three folds. A 25mm lip at the bottom, then a 25mm lip at the top followed by a 40 or 50mm lip that forms the horizontal top surface. (The 40 or 50mm usually matches the vertical upright SHS pieces in the corners of the trailer).
Alternatively, trailer manufacturers make their own sides with their own folders and guillotines, so contact one near you and ask if they will sell you a pair they make for themselves.Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
27th February 2012, 07:30 PM #3Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 1,205
companys that make roof flashings have nice benders and stock gal sheet stock in differnt thickeness that are used to make box gutters, they can do it easy as, i would not call a big company like BHP but a local roofing trade outlet can help you
-
27th February 2012, 07:38 PM #4Member
- Join Date
- Nov 2011
- Location
- Gold Coast
- Posts
- 60
oh ok thanks boys... its something that i just thought the trailer builders and ebay would have....thats cool ill just call one off them or just make a flat panel section myself.
thanks again boys...
oh. yonnie?.one more thing id love for the rear portion to tilt or tip is there a ram kit that can be operated via a electric winch or something...
cheers tonner 355
-
27th February 2012, 07:45 PM #5Member
- Join Date
- Nov 2011
- Location
- Gold Coast
- Posts
- 60
this ones nuts....and i bet he gets a thousand questions at the dump?
-
27th February 2012, 09:14 PM #6Senior Member
- Join Date
- Dec 2011
- Location
- South East Queensland, Australia
- Posts
- 354
Hi, If you feel like a drive to Brisbane
Catalogue Search - Trailer Body Parts
Cheers
If I'm not right, then I'm wrong, I'll just go bend some more bananas.
-
28th February 2012, 05:42 PM #7Member
- Join Date
- Nov 2011
- Location
- Gold Coast
- Posts
- 60
Hey log,
thanks man thats going to be a major help....ive looked for ages but couldnt find s#$t!!! hahahha
cheers again
355 tonner
-
29th February 2012, 09:53 PM #8Senior Member
- Join Date
- Dec 2011
- Location
- South East Queensland, Australia
- Posts
- 354
Well I hope it's some help and you're able to get what you need.
Do keep us posted on you're progress. In you're spare time do build one of those trailers you put pic of.
Cheers.
If I'm not right, then I'm wrong, I'll just go bend some more bananas.
-
2nd March 2012, 10:11 PM #9Member
- Join Date
- Oct 2011
- Location
- queensland
- Posts
- 83
Here is a two more a little closer to you Sheet Metal Firm - Brisbane - Samin Sheet Metal and Active Fabrications Brisbane Gold Coast Queensalnd Australia .
Samin make some nice sides in a choice of profiles. Active fab has sides and everything else you need. Only problem with Active Fab is they don't accept credit card or eftpos. Cash or cheque would you believe. It may have changed in the last year I don't know but can hope.
Garry
-
3rd March 2012, 04:32 PM #10Member
- Join Date
- Nov 2011
- Location
- Gold Coast
- Posts
- 60
thanks garry ill look into them both...
Similar Threads
-
enclosed motorbike trailer build - advice needed
By robjnoble in forum TRAILERS & OTHER FABRICATED STUFFReplies: 9Last Post: 4th September 2011, 01:23 AM -
Trailer Cage Problem - Advice Needed!
By UglyDan in forum TRAILERS & OTHER FABRICATED STUFFReplies: 7Last Post: 14th July 2011, 02:48 PM -
Hartley TS21 trailer sailer (no trailer) No reserve auction
By SimonP in forum CLASSIC BOAT RESCUE & ADOPTIONReplies: 0Last Post: 11th June 2010, 07:48 PM -
Silhouette mkii 5.3m 17' 6" trailer sailer inc trailer
By SimonP in forum CLASSIC BOAT RESCUE & ADOPTIONReplies: 0Last Post: 28th February 2010, 11:16 PM -
ute sides
By Tonyz in forum FINISHINGReplies: 8Last Post: 27th August 2006, 10:42 PM