Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Tray Visibility vsb1
-
28th March 2015, 04:30 PM #1Novice
- Join Date
- Feb 2012
- Location
- mackay
- Posts
- 15
Tray Visibility vsb1
Hi Everyone,
After I was well into building my trailer, I read a section of the vsb1 that I did not realised existed. Here it is to refresh your memories:
''On every trailer, which is 2.2 metres or more in width and which has a body of the tray type, and is not fitted with a rear marking plate. There must be displayed by painting or otherwise across the full width of the rearmost portion of the tray, a clearly visible white or silver coloured horizontal band having a uniform depth of at least 75mm.''
Well my trailer is exactly 2.2 metres wide and I did not plan to have this 75mm strip across the back. Please see photo.
My questions:
Can I have lights and number plate across the 75mm band?
How strict are the inspectors likely to be when I go for roadworthy?
Is easily fixed by attaching some 50x75 rhs under the channel but I thought I might get some opinions on the subject.
Thanks
Sean
-
28th March 2015 04:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th April 2015, 11:12 PM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Hi, I can't see why you can't paint the back section white and have your lights and number plate within the channel section as the way I read it, it doesn't say anything about it being unbroken.
Kryn
-
20th April 2015, 07:55 AM #3Novice
- Join Date
- Feb 2012
- Location
- mackay
- Posts
- 15
Thanks kryn, I ended up adding a length of 50x75 rhs under the channel, will get it registered this week hopefully.
Sean
-
23rd April 2015, 12:03 PM #4
Remember too, that with a great many vehicles due to length you are entitled to have "do not pass turning vehicle" signage on the rear of the trailer.
Part of that signage is the option of having red and yellow zebra plates on the back of the trailer. there are different formats to accomodate a variety of vehicles.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
Similar Threads
-
Particle Visibility
By Chris Parks in forum DUST EXTRACTIONReplies: 15Last Post: 11th April 2013, 12:03 PM -
Getting better knurling visibility
By Michael G in forum METALWORK FORUMReplies: 37Last Post: 20th June 2012, 01:44 PM -
VSB1 v5 - Trailer building Regulations
By Yonnee in forum TRAILERS & OTHER FABRICATED STUFFReplies: 0Last Post: 3rd August 2010, 11:18 PM -
Tray decoration
By chrisb691 in forum MARQUETRY and INTARSIAReplies: 7Last Post: 26th May 2010, 10:02 PM -
The tray
By powderpost in forum WOODWORK PICSReplies: 12Last Post: 15th May 2006, 10:43 PM