Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 10 of 10
  1. #1
    Join Date
    Dec 2006
    Location
    Virginia, USA
    Age
    63
    Posts
    1,904

    Default Black walnut desk

    Title says it all. It's a desk for my library I made from large black walnut live edge slabs. The top has been bookmatched from a piece out of the crotch of the tree. It measures three feet wide on one end and four feet wide on the other and is seven feet long. The back and legs are three inches thick. The top is about an inch and a half. Oil and varnish finish.

    Terrible photos. It is sitting in an unfinished part of my basement where I finished it. My shed being too small and too dusty for finishing work. It will have to be dissassembled and the pieces carried up two flights of stairs as soon as I get the room painted.
    When all is said and done, there is usually a whole lot more said than done.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    9,217

    Default

    oh WowOhWowOh YUM!!!!!!!!!!!!!!!!!!!!!!!!!!!!


    Now that is gorgeous! Yeah, terrible photos, you'll just have to take more as those are not enough and I'm sure there's much, much more there to drool over

  4. #3
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    4,957

    Default

    Yeah, very nice Cisco, thats what we're talking about. 3" Black Walnut, what I would give for a slab of that. And yes more photos, maybe some close ups of those butterflys.
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  5. #4
    Join Date
    Sep 2004
    Location
    Melbourne
    Age
    87
    Posts
    1,327

    Default

    Thats mind blowing Cisco . The butterflys look great . Are they for decoration or do they also join the pieces .Must weigh a ton

    Peter
    I've just become an optimist . Iv'e made a 25 year plan -oopps I've had a few birthdays - better make that a 20 year plan

  6. #5
    Join Date
    Dec 2006
    Location
    Virginia, USA
    Age
    63
    Posts
    1,904

    Default

    Thank you all for the kind comments. I started painting the room where it will eventually reside yesterday so I hope for better pictures in about a week.

    The butterflys down the center bookmatch seam are decorative. That seam is reinforced with biscuits so the butterflys are superfluous. The other butterflys, on the other hand, are actually functional. Large black walnut slabs like these are prone to having cracks. Particularly when they are crotch slabs, as these are. The butterflys are placed across the cracks to prevent them from growing any larger. Hopefully, that is. Anyway, that's the theory and I'm sticking to it.

    This is my first attempt at slab furniture and I looked at many finished pieces before starting. The butterflys across the cracks seem to be a recurring theme so I simply copied them. SOme have asked why I didn't use a darker timber to make them less visible. I am of the opinion that, if they are going to be there at all, make them out of a dressy timber and let them stand out.

    This beast is bloody heavy. It will have to be taken completely apart to get it up the two flights of stairs. I will have to bribe my neighbor with beer to get some help with this one. "Hey, Kevin, what are you doing this afternoon? I've got something to show you."
    When all is said and done, there is usually a whole lot more said than done.

  7. #6
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    9,217

    Default

    I reckon that would work - the bribe that is

    Good luck with the move.

    cheers
    Wendy

  8. #7
    Join Date
    Aug 2004
    Location
    Coffs Harbour
    Posts
    2,019

    Default

    That is a great looking desk.

    Normally I don't like the look of butterflies but yours work well.
    I think you made the right decision to use contrasting timber.

    How have you joined the stretcher to the ends?

    Can it be completely disassembled for moving?
    Scally
    __________________________________________
    The ark was built by an amateur
    the titanic was built by professionals

  9. #8
    Join Date
    Jul 2004
    Location
    Laurieton
    Posts
    2,251

    Default

    That is one beautiful desk. Any trouble resawing the timber for the book match.
    Bob

    "If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
    - Vic Oliver

  10. #9
    Join Date
    Dec 2006
    Location
    Virginia, USA
    Age
    63
    Posts
    1,904

    Default

    It can be completely disassembled for moving (thank goodness). Each piece weighs a good bit. And I had no difficulty whatsoever resawing for the bookmatch. The place I bought it from did it for me. For a small charge of course.
    When all is said and done, there is usually a whole lot more said than done.

  11. #10
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Thumbs up

    Drooool, dribble, slobber!!!

    Brilliant!!!

Similar Threads

  1. English and Black Walnut wood
    By Tim Ber in forum TIMBER
    Replies: 19
    Last Post: 22nd October 2009, 07:33 AM
  2. black walnut
    By cyco in forum TIMBER
    Replies: 10
    Last Post: 18th October 2007, 05:22 PM
  3. Z End Table (Black Walnut)
    By treebutcher in forum WOODWORK PICS
    Replies: 44
    Last Post: 31st October 2006, 05:03 AM
  4. American Walnut(black)
    By RyanUSA in forum TIMBER
    Replies: 4
    Last Post: 5th June 2006, 01:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •