Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2012
    Location
    Melbourne
    Posts
    91

    Default Blackwood 'Storage Rack'

    I made a 'wood storage rack'/bookshelf...



    Whilst it may seem strange, that is genuinely the primary purpose of this build. As yet, I have no house and shed to my name and whilst renting in various places, there is very little space to store timber. The furniture I make at the moment must be multi-purpose with the ability to quickly pack down for transport. It must also be able to be hoisted up balconies, drawn through tight front entrances (no pun intended) and placed on car roof racks.

    I had 5 slabs of Blackwood that were taking up space. I chose the best 3 for this job. They were all a bit twisted, cupped and bowed. The design of this ‘wood storage rack’ not only maintains the timber without damage (joinery mortices, screw holes etc), the internal forces and external loads applied will straighten some of the bows and twists.

    This has been a workout for the mind as the timber was not only twisted, cupped and bowed but also because of the live edges, the side dimensions are not consistent. I have learned a lot from the past two main projects I have worked on in terms of the final layout and fitment.









    The look is quite rustic which was the idea. Upon installing it, I realised that it will take a while to grow on me. I would prefer a more elegant and fluid design. The F17 hardwood for the legs came from a local timberyard during the first COVID lockdown in Melbourne as it was the only timber I could source at the time. Thankfully a total legend working there was happy to help me sift through the racks to find a couple of pieces that were usable. The front pieces look to me like Messmate and the rear legs have pink tinge to them so I’m assuming they are made of ‘Tasmanian Oak/Ash’.

    The funny thing is… this project took place over about 4 months… I started it… lockdown 1.0 happened… and after I cut the mortices in the legs, I decided to build a workbench before finishing the project. The workbench took a couple of months to complete, hampered by limited materials and basic equipment. I then set up a mini workshop in the shared garage area… and four months later have finally gotten it done.

    I am very glad that I took my time as in the process I attempted to learn as much as possible. For example, before cutting the ends of the slabs square, I installed a fine cut blade in a mitre saw and squared the blade to the fence. Fairly basic operations however I’d never done them before and they are now helpful skills for life.








    Looking back on the project, I am wondering why I didn’t use wedged through tenons rather than a pinned truss-like system. And then I remember that initially I didn’t know how long I’ll keep the shelves for. And at the time I didn’t have tools on site in order to do that. Currently I think that if I want to use the blackwood for projects, I can swap them for other wood that needs storing.

    There are many awesome things that happen upon finishing a build.

    Firstly, the relief and elation at seeing and feeling something that has brewing in the minds’ eye for a long time come to reality. The awe of having something before you that others can see, that beforehand was only an idea and an interconnection of inspiration, research and ideas.

    Secondly, the strange space of feeling both full with the finished project, and the growing emptiness and hunger for the next thing!

    Thanks for reading

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2019
    Location
    NSW
    Age
    37
    Posts
    1,126

    Default

    was there meant to be pictures?

  4. #3
    Join Date
    Oct 2012
    Location
    Melbourne
    Posts
    91

  5. #4
    Join Date
    Oct 2012
    Location
    Melbourne
    Posts
    91

    Default

    The middle sections of the shelves are now full of books. Big folders on the middle shelf and smaller ones on the bottom. I think that the shelves look a lot more natural now that they are being used and the design elements blend in. I may post photos of this.... If I finish my tax and get them clean enough

  6. #5
    Join Date
    Oct 2015
    Location
    Ringwood, VIC
    Posts
    575

    Default

    Neat idea. Well done.
    And "thanks" for the tax reminder. ��

  7. #6
    Join Date
    Apr 2019
    Location
    NSW
    Age
    37
    Posts
    1,126

    Default

    Quote Originally Posted by Oldmeadow View Post
    The middle sections of the shelves are now full of books. Big folders on the middle shelf and smaller ones on the bottom. I think that the shelves look a lot more natural now that they are being used and the design elements blend in. I may post photos of this.... If I finish my tax and get them clean enough
    your original post pics didn't work on my home or work PC. this lot has though.

    nice work, what did you finish them with?

  8. #7
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    14,138

    Default

    Quote Originally Posted by havabeer69 View Post
    your original post pics didn't work on my home or work PC. this lot has though.
    Probably because the pics are hosted on an unsecure page, it’s on a http site whereas the pics are on the forum which is a https site

  9. #8
    Join Date
    Oct 2012
    Location
    Melbourne
    Posts
    91

    Default

    Thanks DJs! I'll probably just use the normal attachment system or find a secure hosting site.

    RE the finishing, fitty:fitty mix of raw linseed and turps. I fine sanded the fronts of the legs and applied about 7 coats over a couple of months.

    The slabs got a couple of quick soakings, and boy did they sponge it up! Some surfaces had some old lacquer on them that I didn't bother to remove. I sanded the top piece and finished it properly.

    I installed it inside a couple of months ago and had the stinky linseed smell for a week or two. Melbourne at that time was too cold to drive the curing process, and the lack of fresh air (too cold to leave the windows open) didn't help. All good, can't smell it anymore

Similar Threads

  1. Timber storage rack
    By snowyskiesau in forum THE SHED
    Replies: 9
    Last Post: 17th January 2016, 01:20 PM
  2. Wood storage Rack for the Shed
    By stevepay in forum THE SHED
    Replies: 15
    Last Post: 1st October 2013, 10:11 PM
  3. New metal storage rack
    By BobL in forum METALWORK FORUM
    Replies: 3
    Last Post: 18th May 2011, 11:28 AM
  4. Timber Storage Rack
    By RayG in forum METALWORK FORUM
    Replies: 1
    Last Post: 30th April 2010, 10:14 PM
  5. Cd Storage Rack
    By meganglo in forum BOAT RESOURCES / PRODUCT SEARCH
    Replies: 7
    Last Post: 11th January 2008, 06:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •